GIstre DIVERTIMENTO · SOLUZIONI PER PARCHI · CONSEGNA GLOBALE
Torri & Lascia le giostre

63m Giro in caduta libera

UN 63 m caduta libera con a 32 cabina passeggeri, UN 80 km/h discesa e 180 ciclisti all'ora - il punto di riferimento del brivido della gamma DINIS.

Riferimento del prezzoA partire da 597.900 USD
Altezza dell'attrezzatura63 M
Capacità passeggeri32 persone
Velocità di discesa80 km/h
Potenza installata520 kW
Discussione sulla personalizzazioneSupporto alla produzioneConsegna / guida all'installazione
PUNTI PRINCIPALI

Perché gli acquirenti considerano questo modello

  • UN 63 m landmark ride with a 32 cabina passeggeri
  • Descent speed of 80 km/h
  • Documented throughput of 180 ciclisti all'ora
  • Needs a 15 X 15 m site and a 520 kW power supply
  • Braking documentation supplied for local inspection
DATI TECNICI

Specifiche verificate

Altezza dell'attrezzatura63 M
Capacità passeggeri32 persone
Velocità di discesa80 km/h
Potenza installata520 kW
Theoretical throughput180 ciclisti all'ora
Area del sito15 X 15 M
APPLICAZIONI

Dove può adattarsi

Destination amusement parksParchi a temaMajor fairgroundsResort destinationsTourism landmarks
COME SPECIFICARLO

Specify the 63m Free Fall Ride like a buyer, non un catalogo

Tre brevi note. Apri quello che ti serve: niente chiacchiere sulle vendite.

Come leggere i numeri prima di chiedere un prezzo
01Orma & dimensioni

Questo modello: 15 X 15 M. Confrontalo con il tuo sito, più la busta di sicurezza, la coda e l'accesso per la manutenzione.

02Capacità & rendimento

Questo modello: 32 persone. Abbina la produttività oraria alla finestra di picco, non la tua media giornaliera.

03Energia & utilità

Questo modello: 520 kW. Il tuo trasformatore, il cablaggio e la sala di controllo devono corrispondere ad esso. Tutto ciò che manca diventa lavoro extra civile o elettrico.

04Peso & installazione

Il peso totale e i requisiti di base determinano la base, il piano di sollevamento e il programma di installazione.

Quale livello si adatta al tuo progetto
INIZIO STANDARD

Il modello standard

Copre già l'impronta, capacità e aspetto che la maggior parte dei parchi, i centri commerciali e le fiere possono funzionare.

ANDARE IN ALTO

Capacità o scala maggiore

Scegli un modello più grande quando la tua finestra di punta, la tua posizione di riferimento o il prezzo del tuo biglietto richiedono una maggiore produttività.

VAI PERSONALIZZATO

Realizzazione a tema o personalizzata

Quando tema, la capacità o le condizioni del sito non rientrano nell'intervallo standard, l'aspetto e la configurazione sono progettati per il tuo progetto.

Cosa è incluso, e quanto citato separatamente
TIPICAMENTE INCLUSO
  • L'apparecchiatura e la sua configurazione standard
  • Componenti elettrici e meccanici montati in fabbrica
  • Test di fabbrica eseguito prima della spedizione
  • Lista imballaggio, documentazione di funzionamento e manutenzione
  • Pezzi di ricambio indicati nel preventivo
TIPICAMENTE CONFERMATO SEPARATAMENTE
  • Trasporto internazionale, assicurazioni e dogane
  • Fondazione del sito, lavori di base in cemento e acciaio
  • Alimentazione elettrica della giostra e lavori elettrici locali
  • Supervisione dell'installazione, viaggio e alloggio
  • Ispezione locale, certificazioni e licenze d'esercizio

Conferma la suddivisione esatta per modello con il team di vendita: l'ambito finale è indicato nel preventivo.

Prezzo di fabbrica indicativo, escluse tasse e trasporto. La guida all'installazione è inclusa. La produzione riguarda 35 giorni; la garanzia è gratuita per un anno più manutenzione a vita.

DETTAGLI DEL PRODOTTO

Buying notes for the 63m Free Fall Ride

UN 63 m free fall is not a ride you buy to fill a gap in the line-up. It is the reason people drive to your park instead of the one closer to home, and it changes what your park is.

DINIS builds this one around a 32-passenger cabin, UN 63 m structure and an 80 km/h descent. Before you fall in love with the height, check two numbers: your power supply and your civil works budget. If that height is more than the site can approve, IL 35m torre rotante keeps a tower ride on three containers, e il tower range sets all four models side by side.

63m free fall tower for outdoor parks with a 32 cabina passeggeri
free fall tower installed in a city park and running with visitors
drop tower braking and slow down principle diagram for free fall rides

The ride people drive to your park for

Local visitors come back for a good family park. Visitors from another city come for one thing they cannot get at home, e un 63 m free fall is that thing.

It lifts everything around it too: ticket price, dwell time, photograph value, and the reason a tour operator puts your park on an itinerary.

The two numbers that decide the project: 63 me 520 kW

Height is the visible number. Power is the one that surprises buyers.

The ride needs 520 kW installati. That usually means a dedicated supply, a conversation with your utility company and a cable route planned before the foundation is poured. Start that early, because it is the longest item in the whole programme.

The site area is 15 X 15 M, which is modest for a landmark of this height.

Capacità: 180 riders an hour and how to sell it

The cabin carries 32 passengers per cycle and the documented throughput is 180 ciclisti all'ora.

Numbers like that suit a timed or premium ticket. A ride this tall rarely queues like a family coaster, and most operators price it as the highest-value attraction on site.

How it slows down: the question your inspector will ask

Free fall rides do not simply let go. The descent is controlled at 80 km/h, and the braking system stops a fully loaded cabin safely on every cycle.

We supply the braking description, the drawings and the inspection records with the machine. Put them in front of your local authority before the tower arrives, not after.

Ask for the braking diagram at enquiry stage

It is the fastest way to start a technical conversation with your inspector, and the diagram travels with the delivery documents.

Terra, foundation and installation

Foundation

A tower of this height puts real load into the ground. Base loads and anchor layouts are issued with the drawings, and the concrete work is built locally to that specification.

Installazione

The structure arrives in transportable sections. Plan the crane class, the access road and the assembly area before shipment, and keep the site fenced while the tower goes up.

Is a 63m free fall right for your park?

SÌ, if you run a destination amusement park, a large theme park or a major fairground, and your site already supports a high-capacity power supply and a premium ticket.

NO, if you run a family park, a mall or a resort without a dedicated supply. In those cases the 35 m rotating tower delivers vertical thrill on far less power and a much shorter project.

Questions buyers ask about a 63m free fall

How long does the ride last?

The lift takes longer than the drop, which is exactly why riders queue again. Your cycle plan comes from the throughput figure and your own loading routine.

Do we need special certification?

Expect your market to treat a ride of this size as a major installation. Full documentation comes with the machine, and local certification is confirmed with your authority.

Can it be themed?

SÌ. Cabin appearance, lighting and the surrounding structure are the usual customizations.

Riferimento tecnico: 63 struttura m / 32 passeggeri per ciclo / 80 km/h descent / 520 kW installed power / 180 ciclisti all'ora / 15 X 15 m site area.

COSA INCLUDERE
  • Paese
  • Dimensioni o pianta del sito
  • Interno o esterno
  • Le corse che hai in mente
  • Data di apertura

Preferisco parlare? Scrivici su WhatsApp, o e-mail [email protected]

Modulo di contatto 1

Ottieni un preventivo gratuito

PRODUZIONE

Dove viene costruita questa giostra.

Taglio di precisione, saldatura certificata, sabbiatura, vernice cotta multistrato, FRP interno, apparecchiature di ispezione dedicate, e un test completo prima che il contenitore venga caricato.

01Fabbricazione di precisione

Taglio laser per piastre e tubi, con processi di saldatura professionali.

02Protezione della superficie

Sabbiatura più processo di verniciatura a forno multistrato, che è ciò che mantiene il traguardo in una corsa all'aperto.

03FRP interno

I componenti in fibra di vetro sono stampati internamente in resina, in modo che le parti a tema corrispondano al design finito.

04Ispezione e test

Ultrasonico, direzioni per l'ispezione di particelle magnetiche e penetrazione, oltre a un campo di prova pre-consegna dedicato.

PRODOTTI CORRELATI

Altri prodotti in questa direzione.