GIstre DIVERTIMENTO · SOLUZIONI PER PARCHI · CONSEGNA GLOBALE
Grandi corse

Giro in caduta libera

UN 63 m caduta libera per 32 cavalieri con 80 km/h velocità di discesa e 180 passeggeri all'ora. Il viaggio da brivido caratteristico del catalogo.

Riferimento del prezzoFrom US$69,500
RangeRotating towers and free fall rides
Tower models15 M, 25 me 35 m rotating towers
Free fall model63 M, 32 cavalieri
Operating heights12.5 m a 52 M
Discussione sulla personalizzazioneSupporto alla produzioneConsegna / guida all'installazione
PUNTI PRINCIPALI

Perché gli acquirenti considerano questo modello

  • Four heights in one range: 15 M, 25 M, 35 me 63 M
  • Footprints from 8 X 8 m a 15 X 15 M
  • Power from 40 kW a 520 kW, so the site decides the model
  • Throughput up to 180 riders per hour on the 63 sono caduta libera
  • Delivery from one to three 40HQ containers
DATI TECNICI

Specifiche verificate

RangeRotating towers and free fall rides
Tower models15 M, 25 me 35 m rotating towers
Free fall model63 M, 32 cavalieri
Operating heights12.5 m a 52 M
Ciclisti per ciclo12, 16 O 32
Potenza installata40 kW a 520 kW
Orma8 X 8 m a 15 X 15 M
Consegna1 A 3 contenitori da 40HQ
APPLICAZIONI

Dove può adattarsi

City parksTheme parksMalls and indoor centresAree panoramicheFairgrounds
COME SPECIFICARLO

Specify the Free Fall Ride like a buyer, non un catalogo

Tre brevi note. Apri quello che ti serve: niente chiacchiere sulle vendite.

Come leggere i numeri prima di chiedere un prezzo
01Orma & dimensioni

Questo modello: 8 X 8 m a 15 X 15 M. Confrontalo con il tuo sito, più la busta di sicurezza, la coda e l'accesso per la manutenzione.

02Capacità & rendimento

Questo modello: 12, 16 O 32. Abbina la produttività oraria alla finestra di picco, non la tua media giornaliera.

03Energia & utilità

Questo modello: 40 kW a 520 kW. Il tuo trasformatore, il cablaggio e la sala di controllo devono corrispondere ad esso. Tutto ciò che manca diventa lavoro extra civile o elettrico.

04Peso & installazione

Il peso totale e i requisiti di base determinano la base, il piano di sollevamento e il programma di installazione.

Quale livello si adatta al tuo progetto
INIZIO STANDARD

Il modello standard

Copre già l'impronta, capacità e aspetto che la maggior parte dei parchi, i centri commerciali e le fiere possono funzionare.

ANDARE IN ALTO

Capacità o scala maggiore

Scegli un modello più grande quando la tua finestra di punta, la tua posizione di riferimento o il prezzo del tuo biglietto richiedono una maggiore produttività.

VAI PERSONALIZZATO

Realizzazione a tema o personalizzata

Quando tema, la capacità o le condizioni del sito non rientrano nell'intervallo standard, l'aspetto e la configurazione sono progettati per il tuo progetto.

Cosa è incluso, e quanto citato separatamente
TIPICAMENTE INCLUSO
  • L'apparecchiatura e la sua configurazione standard
  • Componenti elettrici e meccanici montati in fabbrica
  • Test di fabbrica eseguito prima della spedizione
  • Lista imballaggio, documentazione di funzionamento e manutenzione
  • Pezzi di ricambio indicati nel preventivo
TIPICAMENTE CONFERMATO SEPARATAMENTE
  • Trasporto internazionale, assicurazioni e dogane
  • Fondazione del sito, lavori di base in cemento e acciaio
  • Alimentazione elettrica della giostra e lavori elettrici locali
  • Supervisione dell'installazione, viaggio e alloggio
  • Ispezione locale, certificazioni e licenze d'esercizio

Conferma la suddivisione esatta per modello con il team di vendita: l'ambito finale è indicato nel preventivo.

Prezzo di fabbrica indicativo, escluse tasse e trasporto. La guida all'installazione è inclusa. La produzione riguarda 35 giorni; la garanzia è gratuita per un anno più manutenzione a vita.

DETTAGLI DEL PRODOTTO

Buying notes for the Free Fall Ride

Four towers, one decision. The free fall range runs from a 15 m rotating tower that fits beside a shopping centre to a 63 m free fall that becomes the tallest thing in the district.

Every model does the same thing: lift a cabin, hold it, then let it come down fast. What changes is height, seat count, power and the size of the base you have to build.

4models in the range
12.5-52 Maltezza operativa
12-32riders per cycle
40-520 kWinstalled power
15m rotating tower ride installed beside a park walkway
25m rotating tower running in an amusement park
63m free fall tower standing over an outdoor park

The four models side by side

15 M

The compact tower

12 riders to 12.5 m on an 8 X 8 m base with 40 kW installati. The only model that suits an indoor position. See the 15m rotating tower.

35 M

The landmark

16 riders to 28.5 m on an 11 X 8 m base, dual hydraulic cylinders, 90 kW installed and three containers. See the 35m rotating tower.

63 M

The destination ride

32 riders on the tallest model, with the highest throughput and the largest power demand. See the 63m free fall.

Start with two limits: height and power

Your site sets both before your budget does. A tower that cannot get a power connection of the right size is not a cheaper tower, it is a delayed project.

Installed power runs from 40 kW a 520 kW across the range. IL 15 m tower works on a standard mall supply; IL 63 m model needs an industrial connection. Send us the supply you have and the answer narrows to one or two models immediately. The difference between the two machine types matters before you shortlist: drop tower vs free fall sets it out ride by ride.

Cosa cambia man mano che la torre diventa più alta

  1. Trasporto

    One container for the 25 torre m, tre per il 35 modello m. The taller the tower, the more of the budget sits in shipping rather than in the ride.

  2. Fondazione e gru

    Base plates grow with height, and the crane that lifts the sections has to reach the base. Check the access road before you choose the model.

  3. Inspection and maintenance

    Cylinders, brakes and the cabin release are the parts your team will inspect. Ask for the interval in writing before you order, and plan the schedule around it.

Which model fits which buyer

A mall or an indoor entertainment centre wants the 15 torre m, because it is the only one that fits under a roof. A city park or a family park starting a ride line-up wants the 25 torre m, because it delivers a real tower ride on one container.

A theme park or a scenic area building a landmark wants the 35 m tower for its skyline presence. A destination park that competes on height goes to the 63 sono caduta libera, where the ride is the reason people travel.

Questions buyers ask before choosing

01

Can a tower be installed indoors?

Only the 15 modello m. The others are outdoor structures and need clear height well beyond a building roof.

02

How do I choose between the 25 me 35 m torri?

Start with the plot and the freight. IL 25 m model ships in one container and needs a 9 X 9 m base; IL 35 m model needs three containers and a heavier foundation.

03

What is the difference between a rotating tower and a free fall?

A rotating tower turns the cabin as it lifts and drops. A free fall holds the cabin at the top and releases it. IL 63 m model is the free fall in this range.

04

How many riders per hour?

It depends on the model and the cabin size, from 12 riders on the 15 m tower to 32 on the 63 m ride. Throughput on the tallest model reaches about 180 riders an hour.

05

What power supply will we need?

Between 40 kW and 520 kW depending on the model. Send us your supply and we will tell you which models it supports.

06

Do you build custom heights?

The four models cover most sites. If your project needs a different height, send the brief and we will confirm what is possible.

Riferimento tecnico: rotating towers at 15 M, 25 me 35 M / free fall at 63 m with 32 cavalieri / operating heights 12.5 m a 52 M / 12, 16 O 32 riders per cycle / installed power 40 kW a 520 kW / footprints 8 X 8 m a 15 X 15 M / delivery 1 A 3 x40HQ.

Part of the torri e giostre range built by DINIS.

COSA INCLUDERE
  • Paese
  • Dimensioni o pianta del sito
  • Interno o esterno
  • Le corse che hai in mente
  • Data di apertura

Preferisco parlare? Scrivici su WhatsApp, o e-mail [email protected]

Modulo di contatto 1

Ottieni un preventivo gratuito

PRODUZIONE

Dove viene costruita questa giostra.

Taglio di precisione, saldatura certificata, sabbiatura, vernice cotta multistrato, FRP interno, apparecchiature di ispezione dedicate, e un test completo prima che il contenitore venga caricato.

01Fabbricazione di precisione

Taglio laser per piastre e tubi, con processi di saldatura professionali.

02Protezione della superficie

Sabbiatura più processo di verniciatura a forno multistrato, che è ciò che mantiene il traguardo in una corsa all'aperto.

03FRP interno

I componenti in fibra di vetro sono stampati internamente in resina, in modo che le parti a tema corrispondano al design finito.

04Ispezione e test

Ultrasonico, direzioni per l'ispezione di particelle magnetiche e penetrazione, oltre a un campo di prova pre-consegna dedicato.

PRODOTTI CORRELATI

Altri prodotti in questa direzione.