Buying notes for the Flying Chair Ride for Sale
A Se vende silla voladora is also known as a swing ride, wave swinger or chair swing. The current range includes a compact family model, two high-capacity head-swinging platforms and themed European or rabbit finishes. This guide separates the mechanical model from the appearance package so buyers can compare capacity, site space, power and delivery correctly.

Flying chair ride for sale: compare the current models
The table separates verified mechanical data from appearance. Capacidad, diameter and power belong to the selected ride platform. European and rabbit styling changes the canopy, sillas, lighting and colour scheme, but does not replace the final model confirmation.
16-seat compact swing
24-seat head-swing model

36-seat head-swing model

New European-style finish

Rabbit-theme 24-seat finish

Prices are indicative factory figures and exclude freight, impuesto, base, lifting, installation and local inspection. The 36-seat and new European-style projects are quoted after confirming the final finish, iluminación, operating site and delivery scope.
24-seat head-swing flying chair
The 24-seat model combines rotation with head-swing movement on a φ12 m platform with a 7.5 m altura del equipo. A 10 kilovatios, 380 V drive keeps the electrical package within the supply range commonly available in parks, fairgrounds and larger family entertainment sites.
Its practical value is the middle capacity. It carries enough riders for a paid attraction while requiring less site area, power and foundation scope than the 36-seat model. The final fence must include the suspended-chair envelope, main gate, waiting area and operator position rather than only the φ12 m equipment diameter.
24 ciclistas por ciclo
The seat count supports a mid-sized park or fairground without committing to the footprint of the largest model.
10 accionamiento en kW
Confirm voltage, total connected load, isolator position and cable route with the finished quotation and site electrical plan.
Rotation plus head swing
The ride combines the outward swing of the chairs with a programmed tilting movement. Passenger clearance must follow the final motion envelope.

36-seat head-swing flying chair
The 36-seat configuration uses a φ20 m operating site, a 9.4 m slewing diameter, a 9.2 m static height and a 5 m altura de funcionamiento. It lifts through 2 metro, reaches a 15° operating tilt and uses a 7.5 rpm rotation speed.
Installed capacity is 50 kW él un 380 suministro V. This is a major project condition: the electrical design must include the ride, iluminación, controls and service allowance, while the foundation and fence must be based on this model’s final drawing rather than the 24-seat layout.
- Minimum site review: begin with the φ20 m operating area, then add queue, ticket or boarding access, operator position and maintenance clearance.
- Vertical clearance: plan around the 9.2 m static height, 5 m operating height and 2 m lifting stroke.
- Electrical planning: reserve capacity for the 50 kW installation and confirm cable entry, isolator and control-room location.
- Foundation and delivery: use the final anchor layout, component loads, container list and crane or forklift plan for the confirmed build.
- Weather and emergency: define lightning shutdown, wind monitoring, evacuation and restart procedures from the final manual and local requirements.
New European-style flying chair
The new European-style package gives the swing ride a more formal landscape presence: an ornamental crown and cornice, symmetrical detailing around the centre column, integrated LED lighting and a coordinated colour palette. It suits parks, complejos turísticos, plazas and mixed-use destinations where the ride is part of the visual identity rather than only a capacity asset.
This is a finish and appearance package. Before ordering, confirm the base mechanical model, recuento de asientos, diameter, fuerza, fence line and foundation data. Production drawings should combine the approved appearance with the current structural and electrical package.

24-seat rabbit flying chair
The rabbit version uses the 24-seat, φ12 m, 7.5 metro, 380 V y 10 kW platform. Its visual package replaces the standard canopy and chair treatment with rabbit-themed forms and coordinated lighting, making it suitable for family areas, themed parks, carnivals and attractions that need a recognisable photo setting.
Theme does not remove the commercial requirements. Keep the full swinging envelope clear, provide a supervised boarding gate, plan the finished floor and drainage, and confirm the rider rules for the country of operation.

Sitio, foundation and safety planning
Use the equipment data as the starting point, not the complete plot. The approved layout should show the moving-chair envelope, cerca, entrance and exit, cola, operator line, emergency access, power route and the space needed for unloading and assembly.
Fence the full motion
The fence must contain the chairs at their widest and highest movement. The 36-seat package uses a φ20 m operating site.
Use final loads
The local engineer should design the foundation from the ordered model’s loads and anchor drawing, not a drawing copied from another seat size.
Start with installed capacity
Plan isolation, protection, control position and cable access around the final connected load, de 10 kW on the 24-seat model to 50 kW on the 36-seat model.
Close the procedure gaps
Agree rider limits, restraint checks, loose-item rules, emergency stop, lightning and high-wind shutdown, restart and record keeping before opening.
Riders per hour and operating capacity
Use seats × complete cycles per hour × average occupancy. A 24-seat ride completing six safe cycles in an hour at 85% occupancy would plan around 122 jinetes; it would not use the theoretical figure of 144.
A complete cycle includes boarding, restraint checks, lift and acceleration, the ride interval, deceleration and unloading. Queue layout, operator numbers and rider rules often decide the actual hourly capacity. Confirm the cycle assumption with the factory and use the same figure in the business plan.
Entrega, instalación y mantenimiento
- Approve the model and site
Lock the seat count, apariencia, línea de valla, fuerza, base, drainage and delivery route.
- Confirm the packing plan
Recuento de contenedores, component weights, lifting points, crane or forklift capacity and unloading space are agreed before shipment.
- Prepare the foundation
The local engineer completes and approves the foundation from the final model drawing.
- Assemble and connect
Check parts against the packing list, follow the assembly sequence and connect the approved electrical supply.
- Test and hand over
Test mechanical, electrical and safety functions, operate through the full cycle, train operators and hand over manuals and records.
Before opening
Check chairs, restraints, suspension points, cerca, gates, controls, lighting and abnormal noise before admitting riders.
Planned inspection
Follow the manual for fasteners, joints, conducir, braking and hydraulic checks. Record faults and remove the ride from service if required.
Protect the appearance
Keep paint, decal and lighting specifications with the handover file so European or rabbit-themed parts can be repaired consistently.
Flying chair ride questions buyers ask
Siguiente paso
enviar el pais, available plot, finished clear height, fuente de alimentación, target riders and preferred model or theme. We will confirm the base platform, appearance package, foundation information and delivery scope before quotation.
- País
- Tamaño o plan del sitio
- Interior o exterior
- Paseos que tienes en mente
- Fecha de apertura
Prefiero hablar? envíanos whatsapp, o correo electrónico [email protected]



