Buying notes for the Flying Chair Ride for Sale
А flying chair ride for sale is also known as a swing ride, wave swinger or chair swing. The current range includes a compact family model, two high-capacity head-swinging platforms and themed European or rabbit finishes. This guide separates the mechanical model from the appearance package so buyers can compare capacity, site space, power and delivery correctly.

Flying chair ride for sale: compare the current models
The table separates verified mechanical data from appearance. Емкость, diameter and power belong to the selected ride platform. European and rabbit styling changes the canopy, стулья, lighting and colour scheme, but does not replace the final model confirmation.
16-seat compact swing
24-seat head-swing model

36-seat head-swing model

New European-style finish

Rabbit-theme 24-seat finish

Prices are indicative factory figures and exclude freight, налог, фундамент, подъем, installation and local inspection. The 36-seat and new European-style projects are quoted after confirming the final finish, освещение, operating site and delivery scope.
24-seat head-swing flying chair
The 24-seat model combines rotation with head-swing movement on a φ12 m platform with a 7.5 м высота оборудования. А 10 кВт, 380 V drive keeps the electrical package within the supply range commonly available in parks, fairgrounds and larger family entertainment sites.
Its practical value is the middle capacity. It carries enough riders for a paid attraction while requiring less site area, power and foundation scope than the 36-seat model. The final fence must include the suspended-chair envelope, main gate, waiting area and operator position rather than only the φ12 m equipment diameter.
24 гонщиков за цикл
The seat count supports a mid-sized park or fairground without committing to the footprint of the largest model.
10 кВт привод
Confirm voltage, total connected load, isolator position and cable route with the finished quotation and site electrical plan.
Rotation plus head swing
The ride combines the outward swing of the chairs with a programmed tilting movement. Passenger clearance must follow the final motion envelope.

36-seat head-swing flying chair
The 36-seat configuration uses a φ20 m operating site, а 9.4 диаметр поворота м, а 9.2 m static height and a 5 м рабочая высота. It lifts through 2 м, reaches a 15° operating tilt and uses a 7.5 rpm rotation speed.
Установленная мощность 50 кВт он а 380 В питания. This is a major project condition: the electrical design must include the ride, освещение, controls and service allowance, while the foundation and fence must be based on this model’s final drawing rather than the 24-seat layout.
- Minimum site review: begin with the φ20 m operating area, then add queue, ticket or boarding access, operator position and maintenance clearance.
- Vertical clearance: plan around the 9.2 m static height, 5 m operating height and 2 m lifting stroke.
- Electrical planning: reserve capacity for the 50 kW installation and confirm cable entry, isolator and control-room location.
- Foundation and delivery: use the final anchor layout, component loads, container list and crane or forklift plan for the confirmed build.
- Weather and emergency: define lightning shutdown, wind monitoring, evacuation and restart procedures from the final manual and local requirements.
New European-style flying chair
The new European-style package gives the swing ride a more formal landscape presence: an ornamental crown and cornice, symmetrical detailing around the centre column, integrated LED lighting and a coordinated colour palette. It suits parks, курорты, plazas and mixed-use destinations where the ride is part of the visual identity rather than only a capacity asset.
This is a finish and appearance package. Before ordering, confirm the base mechanical model, seat count, diameter, власть, fence line and foundation data. Production drawings should combine the approved appearance with the current structural and electrical package.

24-seat rabbit flying chair
The rabbit version uses the 24-seat, φ12 m, 7.5 м, 380 В и 10 kW platform. Its visual package replaces the standard canopy and chair treatment with rabbit-themed forms and coordinated lighting, making it suitable for family areas, themed parks, carnivals and attractions that need a recognisable photo setting.
Theme does not remove the commercial requirements. Keep the full swinging envelope clear, provide a supervised boarding gate, plan the finished floor and drainage, and confirm the rider rules for the country of operation.

Сайт, foundation and safety planning
Use the equipment data as the starting point, not the complete plot. The approved layout should show the moving-chair envelope, изгородь, entrance and exit, очередь, operator line, аварийный доступ, power route and the space needed for unloading and assembly.
Fence the full motion
The fence must contain the chairs at their widest and highest movement. The 36-seat package uses a φ20 m operating site.
Use final loads
The local engineer should design the foundation from the ordered model’s loads and anchor drawing, not a drawing copied from another seat size.
Start with installed capacity
Plan isolation, protection, control position and cable access around the final connected load, от 10 kW on the 24-seat model to 50 kW on the 36-seat model.
Close the procedure gaps
Agree rider limits, проверки сдерживания, loose-item rules, emergency stop, lightning and high-wind shutdown, restart and record keeping before opening.
Riders per hour and operating capacity
Use seats × complete cycles per hour × average occupancy. A 24-seat ride completing six safe cycles in an hour at 85% occupancy would plan around 122 всадники; it would not use the theoretical figure of 144.
A complete cycle includes boarding, проверки сдерживания, lift and acceleration, the ride interval, deceleration and unloading. Queue layout, operator numbers and rider rules often decide the actual hourly capacity. Confirm the cycle assumption with the factory and use the same figure in the business plan.
Доставка, установка и обслуживание
- Approve the model and site
Lock the seat count, появление, fence line, власть, фундамент, drainage and delivery route.
- Confirm the packing plan
Количество контейнеров, component weights, lifting points, crane or forklift capacity and unloading space are agreed before shipment.
- Prepare the foundation
The local engineer completes and approves the foundation from the final model drawing.
- Assemble and connect
Check parts against the packing list, follow the assembly sequence and connect the approved electrical supply.
- Test and hand over
Test mechanical, electrical and safety functions, operate through the full cycle, train operators and hand over manuals and records.
Перед открытием
Check chairs, restraints, suspension points, изгородь, ворота, controls, lighting and abnormal noise before admitting riders.
Planned inspection
Follow the manual for fasteners, joints, водить машину, braking and hydraulic checks. Record faults and remove the ride from service if required.
Protect the appearance
Keep paint, decal and lighting specifications with the handover file so European or rabbit-themed parts can be repaired consistently.
Flying chair ride questions buyers ask
Следующий шаг
Отправить страну, available plot, finished clear height, источник питания, target riders and preferred model or theme. We will confirm the base platform, appearance package, foundation information and delivery scope before quotation.
- Страна
- Размер или план сайта
- Крытый или открытый
- Поездки, которые вы имеете в виду
- Дата открытия
Предпочитаю поговорить? Напишите нам в WhatsApp, или по электронной почте [email protected]



