Fahrgeschäfte · PARK-LÖSUNGEN · GLOBALE LIEFERUNG
Große Fahrten

180m Crazy Mouse Achterbahn

A 180 m drehende Achterbahn mit engen Haarnadelkurven und a 7 m Gleishöhe. Beliebt als erste Achterbahn in einem neuen Park.

PreisreferenzFrom US$50,850
Total track length180 Meter
Spurhöhe7 Meter
Number of gliding vehicles4
Gliding speed≤35km/h
Diskussion zur AnpassungFertigungsunterstützungLieferung / Installationsanleitung
WICHTIGSTE HIGHLIGHTS

Warum Käufer dieses Modell in Betracht ziehen

  • A complete coaster in a 17 X 28 m Grundfläche
  • Four spinning cars circulate on a 180 m circuit
  • Track height of 7 m and a top speed of 35 km/h
  • 10.5 kW rated power on a standard supply
  • Versand erfolgt 3 x 40HQ-Container
TECHNISCHE DATEN

Verifizierte Spezifikationen

Total track length180 Meter
Spurhöhe7 Meter
Number of gliding vehicles4
Gliding speed≤35km/h
Rated power10.5KW
Antriebsleistung7.5KW
Rated voltage380V 50HZ
Footage-Bereich17M * 28M
ANWENDUNGEN

Wo es passt

FamilienparksEntertainment centresShopping centre attractionsMessegeländeFerienparks
WIE MAN ES SPEZIFIZIERT

Specify the 180m Crazy Mouse Roller Coaster like a buyer, kein Katalog

Drei kurze Anmerkungen. Öffnen Sie das, was Sie brauchen – kein Verkaufsgespräch.

So lesen Sie die Zahlen, bevor Sie nach einem Preis fragen
01Fußabdruck & Abmessungen

Dieses Modell: 17M * 28M. Vergleichen Sie das mit Ihrer Website, plus Sicherheitsumschlag, die Warteschlange und der Wartungszugang.

02Kapazität & Durchsatz

Sitzplätze pro Takt und Taktzeit legen den realistischen Stundendurchsatz fest. Passen Sie es an Ihr Spitzenfenster an, nicht der Tagesdurchschnitt.

03Leistung & Dienstprogramme

Dieses Modell: 10.5KW. Ihr Transformator, Verkabelung und Kontrollraum müssen dazu passen. Alles, was fehlt, wird zu zusätzlichen Bau- oder Elektroarbeiten.

04Gewicht & Installation

Gesamtgewicht und Grundbedarf entscheiden über das Fundament, den Hebeplan und den Montageplan.

Welche Stufe passt zu Ihrem Projekt?
START STANDARD

Das Standardmodell

Es deckt bereits den Fußabdruck ab, Kapazität und Aussehen, die die meisten Parks, Einkaufszentren und Messen können betrieben werden.

BEWEGEN SIE SICH NACH OBEN

Höhere Kapazität oder Skalierung

Wählen Sie ein größeres Modell, wenn Ihr Spitzenfenster erreicht ist, Ihre Orientierungsposition oder Ihr Ticketpreis benötigen mehr Durchsatz.

Gehen Sie individuell

Thematisch oder individuell gestaltet

Beim Thema, Kapazität oder Standortbedingungen außerhalb des Standardbereichs liegen, Das Erscheinungsbild und die Konfiguration werden für Ihr Projekt entwickelt.

Was ist enthalten, und was separat zitiert wird
Üblicherweise im Lieferumfang enthalten
  • Die Ausrüstung und ihre Standardkonfiguration
  • Elektrische und mechanische Komponenten im Werk montiert
  • Werkstestlauf vor dem Versand
  • Packliste, Betriebs- und Wartungsdokumentation
  • Im Angebot angegebene Ersatzteile
Üblicherweise separat bestätigt
  • Internationale Fracht, Versicherung und Zoll
  • Standortfundament, Arbeiten an Beton- und Stahlfundamenten
  • Stromversorgung des Fahrgeschäfts und örtliche Elektroarbeiten
  • Montageüberwachung, Reise und Unterkunft
  • Lokale Inspektion, Zertifizierung und Betriebslizenzen

Bestätigen Sie die genaue Aufteilung pro Modell mit dem Vertriebsteam – der endgültige Umfang ist im Angebot angegeben.

Richtpreis ab Werk, ohne Steuern und Fracht. Eine Installationsanleitung ist im Lieferumfang enthalten. Die Produktion ist ca 35 Tage; Die Garantie beträgt ein Jahr kostenlos plus lebenslange Wartung.

PRODUKTDETAILS

Buying notes for the 180m Crazy Mouse Roller Coaster

A 180m crazy mouse roller coaster is the coaster a park buys when the plot is fixed and the budget is real. The whole circuit fits a 17 X 28 m site, and four spinning cars run on 180 m of track at up to 35 km/h.

It fits inside an operating park without moving anything else, and it is complete enough to be the reason people come back the following weekend.

180 MSpurlänge
4sich drehende Autos
35 km/htop speed
17 X 28 MFußabdruck
track layout of a 180m crazy mouse spinning coaster
spinning car of a crazy mouse coaster on the track
Verrückte Maus-Achterbahn, die auf einem Rummelplatz läuft

What a 180 m mouse coaster is like to ride

The track height is 7 m and the cars are free to spin. That combination produces the feeling the model is named for: the car turns while it drops, so no two riders face the same direction at the bottom.

It is a family coaster rather than a thrill coaster. Teenagers ride it repeatedly, parents ride it with them, and the height stays below the point where the queue splits by age.

Why a short circuit suits a park buying its first coaster

A long coaster needs a long plot, a bigger foundation programme and a longer queue. A 180 m circuit needs a corner of the park and a station, and it can open in the same season as the decision.

Four cars keep departures frequent. Auf einem 180 m circuit the cars come back quickly, so the queue moves even when the park is busy.

Site check before you order

  • A 17 X 28 m plot with the station inside it
  • Access for the track sections and the crane during assembly
  • 10.5 kW bei 380 V 50 Hz, with the cabinet position agreed
  • A queue and exit line that does not cross a walkway
  • The documentation set for your local authority

Running it: 10.5 kW and a two-person crew

Rated power is 10.5 kW mit a 7.5 kW-Antrieb, which is the lightest load in the coaster range. The lift does the work and the cars run downhill from there, so the energy bill stays flat even on a long operating day. If the choice is between this circuit and a family coaster, crazy mouse or family roller coaster compares them on plot, audience and price.

Two staff run the station: one on the control panel, one on the gate. That crew size is what makes a coaster of this size viable for a park that is open every day rather than only at weekends.

180 m oder 280 M

180 M

The first coaster

A 17 X 28 m Grundstück, four cars and 35 km/h. It suits a park adding its first coaster, or a site where the plot is already spoken for.

280 M

The upgrade

283 m Gleis, five cars and 38 km/h on a 36 X 28 m Grundstück. Der 280m crazy mouse coaster is the version operators move to when the first one is always full.

Preis

The indicative factory price starts at US$50,850, shipping in 3 x 40HQ-Container. Schiene, foundation and installation labour are quoted for your site.

If you are still deciding between a coaster and a flat ride, Die Familienachterbahn runs a longer circuit for a different audience, und die Riesenpendel delivers thrill without a track at all.

Questions buyers ask about the 180m crazy mouse

01

How fast is it?

Bis zu 35 km/h. The spinning cars make the ride feel faster than the number suggests.

02

How much power does it need?

10.5 kW rated with a 7.5 kW-Antrieb, An 380 V 50 Hz. It is one of the lightest coaster loads you can install.

03

Is it suitable for children?

It is a family coaster. Height and age limits come from your local operating rules, und wir liefern die Zahlen für die Bewerbung.

04

How many containers?

3 x 40HQ, plus the crane window for assembly.

05

Kann es thematisch sein??

Ja. Car shells, colours and the station are the usual places to carry a theme, and the car body is a large flat surface for artwork.

06

Was ist die Vorlaufzeit??

Um 35 Tage in der Produktion, then shipping and site assembly. Confirm the delivery window against your opening date when you order.

Technische Referenz: Spurlänge 180 M / Spurhöhe 7 M / four gliding vehicles / speed up to 35 km/h / rated power 10.5 kW mit a 7.5 kW-Antrieb / 380 V 50 Hz / Fußabdruck 17 X 28 M / 3 x 40HQ.

Teil der roller coasters Sortiment von DINIS.

WAS SOLLTE EINGESCHLOSSEN WERDEN
  • Land
  • Größe oder Plan der Website
  • Drinnen oder draußen
  • Fahrten, die Sie im Sinn haben
  • Eröffnungsdatum

Lieber reden? WhatsApp uns, oder E-Mail [email protected]

Kontaktformular 1

Holen Sie sich ein kostenloses Angebot

HERSTELLUNG

Wo dieses Fahrgeschäft gebaut wird.

Präzises Schneiden, Zertifiziertes Schweißen, Sandstrahlen, mehrschichtige Einbrennlackierung, hauseigenes FRP, spezielle Inspektionsausrüstung, und ein vollständiger Testlauf, bevor der Container beladen wird.

01Präzisionsfertigung

Laserschneiden von Platten und Rohren, mit professionellen Schweißverfahren.

02Oberflächenschutz

Sandstrahlen plus mehrschichtiges Einbrennlackierungsverfahren, Das ist es, was das Finish bei einer Fahrt im Freien gewährleistet.

03Eigenes FRP

Glasfaserkomponenten werden im eigenen Haus aus Harz geformt, So passen thematische Teile zum fertigen Design.

04Inspektion und Prüfung

Ultraschall, Anweisungen zur Magnetpulver- und Penetrationsprüfung sowie ein spezielles Testfeld vor der Auslieferung.

VERWANDTE PRODUKTE

Weitere Produkte in dieser Richtung.