GIstre DIVERTIMENTO · SOLUZIONI PER PARCHI · CONSEGNA GLOBALE
Cavalcate da brivido

Discoteca volante UFO

The flying disco coaster is the ride that turns a flat platform into a 33 km/h run. One vehicle of 24 riders climbs a curved rail, spins on a turntable at the top and comes back down the other side. Se il…

Riferimento del prezzoFrom US$78,500
Capacità passeggeri24 people per vehicle
Velocità operativa9.2 SM (33 km/h)
Altezza operativa9.4 M
Rail height9.2 M
Discussione sulla personalizzazioneSupporto alla produzioneConsegna / guida all'installazione
PUNTI PRINCIPALI

Perché gli acquirenti considerano questo modello

  • 24 riders per vehicle on a 12.6 m rail radius
  • 33 km/h with a turntable spin at the top
  • 9.4 m operating height on a 27 X 13 trama
  • 51.5 kW drive with gear and friction wheel transmission
  • Running at Vinpearl Phu Quoc, Owa Alabama and Lost Island Iowa
DATI TECNICI

Specifiche verificate

Capacità passeggeri24 people per vehicle
Velocità operativa9.2 SM (33 km/h)
Altezza operativa9.4 M
Rail height9.2 M
Rail radius12.6 M
Diametro del piatto girevole6.5 M
Turntable speed9.7 rpm maximum, usually 7-8 RPM
Operating time2-3 minuti, regolabile
Potenza motrice51.5 kW (44 kW running + 7.5 kW turntable)
TrasmissioneGear drive and friction wheel
InstallazioneFixed
Superficie terrestre27 mx 13 M
Vita utile del progetto15 anni
Spedizione2 x40HQ, Di 15,400 kg
APPLICAZIONI

Dove può adattarsi

Parchi a temaDestination parksResortFieraEntertainment complexes
COME SPECIFICARLO

Specify the UFO Flying Disco like a buyer, non un catalogo

Tre brevi note. Apri quello che ti serve: niente chiacchiere sulle vendite.

Come leggere i numeri prima di chiedere un prezzo
01Orma & dimensioni

Questo modello: 27 mx 13 M. Confrontalo con il tuo sito, più la busta di sicurezza, la coda e l'accesso per la manutenzione.

02Capacità & rendimento

Questo modello: 24 people per vehicle. Abbina la produttività oraria alla finestra di picco, non la tua media giornaliera.

03Energia & utilità

Questo modello: 51.5 kW (44 kW running + 7.5 kW turntable). Il tuo trasformatore, il cablaggio e la sala di controllo devono corrispondere ad esso. Tutto ciò che manca diventa lavoro extra civile o elettrico.

04Peso & installazione

Il peso totale e i requisiti di base determinano la base, il piano di sollevamento e il programma di installazione.

Quale livello si adatta al tuo progetto
INIZIO STANDARD

Il modello standard

Copre già l'impronta, capacità e aspetto che la maggior parte dei parchi, i centri commerciali e le fiere possono funzionare.

ANDARE IN ALTO

Capacità o scala maggiore

Scegli un modello più grande quando la tua finestra di punta, la tua posizione di riferimento o il prezzo del tuo biglietto richiedono una maggiore produttività.

VAI PERSONALIZZATO

Realizzazione a tema o personalizzata

Quando tema, la capacità o le condizioni del sito non rientrano nell'intervallo standard, l'aspetto e la configurazione sono progettati per il tuo progetto.

Cosa è incluso, e quanto citato separatamente
TIPICAMENTE INCLUSO
  • L'apparecchiatura e la sua configurazione standard
  • Componenti elettrici e meccanici montati in fabbrica
  • Test di fabbrica eseguito prima della spedizione
  • Lista imballaggio, documentazione di funzionamento e manutenzione
  • Pezzi di ricambio indicati nel preventivo
TIPICAMENTE CONFERMATO SEPARATAMENTE
  • Trasporto internazionale, assicurazioni e dogane
  • Fondazione del sito, lavori di base in cemento e acciaio
  • Alimentazione elettrica della giostra e lavori elettrici locali
  • Supervisione dell'installazione, viaggio e alloggio
  • Ispezione locale, certificazioni e licenze d'esercizio

Conferma la suddivisione esatta per modello con il team di vendita: l'ambito finale è indicato nel preventivo.

Prezzo di fabbrica indicativo, escluse tasse e trasporto. La guida all'installazione è inclusa. La produzione riguarda 35 giorni; la garanzia è gratuita per un anno più manutenzione a vita.

DETTAGLI DEL PRODOTTO

Buying notes for the UFO Flying Disco

The flying disco coaster is the ride that turns a flat platform into a 33 km/h run. One vehicle of 24 riders climbs a curved rail, spins on a turntable at the top and comes back down the other side. If the plot suits a coaster instead, IL 180Sono un topo pazzo fits 17 X 28 M, e il giradischi volante delivers a similar turn on a flat platform.

It stands 9.4 M, needs a 27 X 13 m plot and ships in two 40HQ containers. For a park adding its first high-energy ride, that is a compact package with a large presence.

24riders per vehicle
33 km/htop speed
9.4 Maltezza operativa
27 X 13 Mland area
flying disco coaster running at vinpearl phu quoc in vietnam
flying disco ride installed at a park in alabama
flying disco coaster installed at lost island in iowa

What a flying disco does that a flat ride cannot

A flat ride turns you in place. This one turns you in place and moves you along a rail at the same time, so the two motions arrive together and the ride reads as a coaster from the walkway.

That combination is why operators call it a coaster even though it is a single vehicle on a short track. Visitors queue for the movement, not for the height.

IL 12.6 m rail radius defines your plot

The rail radius is 12.6 m and the land area is 27 X 13 M. Get the plot right before you compare prices, because the layout decides how much fencing, queue and landscaping the project needs.

The turntable at the top is 6.5 m across. It is where the ride slows, spins and turns back, and it is the part visitors photograph.

Layout note: Give the queue a view of the turntable rather than the back of the vehicle. The spin at the top is the moment people film, and a queue that can see it keeps its length.

Twenty-four riders, one vehicle

One vehicle carries 24 people and the operating time is two to three minutes, regolabile. That cycle is short, so the queue moves, and the vehicle is large enough that a group boards in one turn.

Operating speed reaches 9.2 SM, Di 33 km/h, with the turntable running up to 9.7 RPM. In normal operation the turntable is set between 7 E 8 RPM, which is where most parks run it.

Guida e potenza: 51.5 kW

The drive is 51.5 kW, split between a 44 kW running motor and a 7.5 kW turntable motor. Transmission is gear drive plus a friction wheel, a combination chosen for a rail this short.

The ride is a fixed installation on a 380 fornitura V, with a design service life of 15 anni. Confirm the cable route and the cabinet position while the foundation is still open.

Where it has been installed

Units from this range run at Vinpearl Phu Quoc in Vietnam, at Owa in Alabama and at Lost Island in Iowa. Those three sites cover a resort, a coastal park and a destination park, which is the range of settings the ride suits.

If your site is a city park with a lighter footfall pattern, IL 180m crazy mouse coaster gives a full circuit in a 17 X 28 m plot and is easier to justify on ticket income.

Price and delivery

The indicative factory price starts at US$78,500, shipping in 2 x 40HQ containers at about 15,400 kg. Trasporto, vengono preventivati ​​i lavori di fondazione e installazione per il tuo sito.

Questions buyers ask about the flying disco

01

How fast does it go?

Fino a 9.2 SM, Di 33 km/h, with the turntable at up to 9.7 rpm and normally set between 7 E 8 RPM.

02

Quanti ciclisti per ciclo?

Twenty-four in one vehicle. The operating time is two to three minutes and is adjustable.

03

Quale alimentazione è necessaria?

51.5 kW lui 380 V, made up of a 44 kW running motor and a 7.5 kW turntable motor.

04

How much land does it need?

UN 27 X 13 m area with a 12.6 m rail radius. Plan the queue and fence outside that.

05

Is it a coaster or a flat ride?

It is a flat ride that behaves like a coaster: one vehicle, a curved rail and a turntable. Visitors read it as a coaster.

06

Qual è il tempo di consegna??

Di 35 giorni in produzione, quindi spedizione in due container e montaggio in cantiere. Confirm the crane date with the quotation.

Riferimento tecnico: 24 riders per vehicle / velocità operativa 9.2 SM (33 km/h) / altezza operativa 9.4 M / rail height 9.2 M / rail radius 12.6 M / turntable diameter 6.5 M / turntable 9.7 rpm maximum, usually 7-8 RPM / operating time 2-3 minuti, regolabile / guidare 51.5 kW (44 kW running + 7.5 kW turntable), gear and friction wheel transmission / fixed installation / land area 27 X 13 M / design life 15 anni / 2 x 40HQ a ca 15,400 kg.

Parte del corse da brivido gamma realizzata da DINIS.

COSA INCLUDERE
  • Paese
  • Dimensioni o pianta del sito
  • Interno o esterno
  • Le corse che hai in mente
  • Data di apertura

Preferisco parlare? Scrivici su WhatsApp, o e-mail [email protected]

Modulo di contatto 1

Ottieni un preventivo gratuito

PRODUZIONE

Dove viene costruita questa giostra.

Taglio di precisione, saldatura certificata, sabbiatura, vernice cotta multistrato, FRP interno, apparecchiature di ispezione dedicate, e un test completo prima che il contenitore venga caricato.

01Fabbricazione di precisione

Taglio laser per piastre e tubi, con processi di saldatura professionali.

02Protezione della superficie

Sabbiatura più processo di verniciatura a forno multistrato, che è ciò che mantiene il traguardo in una corsa all'aperto.

03FRP interno

I componenti in fibra di vetro sono stampati internamente in resina, in modo che le parti a tema corrispondano al design finito.

04Ispezione e test

Ultrasonico, direzioni per l'ispezione di particelle magnetiche e penetrazione, oltre a un campo di prova pre-consegna dedicato.

PRODOTTI CORRELATI

Altri prodotti in questa direzione.