Fahrgeschäfte · PARK-LÖSUNGEN · GLOBALE LIEFERUNG
Nervenkitzelfahrten

UFO-Fliegende Disco

The flying disco coaster is the ride that turns a flat platform into a 33 km/h run. One vehicle of 24 riders climbs a curved rail, spins on a turntable at the top and comes back down the other side. Wenn die…

PreisreferenzFrom US$78,500
Passagierkapazität24 people per vehicle
Betriebsgeschwindigkeit9.2 MS (33 km/h)
Betriebshöhe9.4 M
Rail height9.2 M
Diskussion zur AnpassungFertigungsunterstützungLieferung / Installationsanleitung
WICHTIGSTE HIGHLIGHTS

Warum Käufer dieses Modell in Betracht ziehen

  • 24 riders per vehicle on a 12.6 m rail radius
  • 33 km/h with a turntable spin at the top
  • 9.4 m Arbeitshöhe auf a 27 X 13 m Grundstück
  • 51.5 kW drive with gear and friction wheel transmission
  • Running at Vinpearl Phu Quoc, Owa Alabama and Lost Island Iowa
TECHNISCHE DATEN

Verifizierte Spezifikationen

Passagierkapazität24 people per vehicle
Betriebsgeschwindigkeit9.2 MS (33 km/h)
Betriebshöhe9.4 M
Rail height9.2 M
Rail radius12.6 M
Plattentellerdurchmesser6.5 M
Turntable speed9.7 rpm maximum, usually 7-8 Drehzahl
Betriebszeit2-3 Minuten, einstellbar
Antriebsleistung51.5 kW (44 kW running + 7.5 kW turntable)
ÜbertragungGear drive and friction wheel
InstallationBehoben
Landfläche27 m x 13 M
Design-Lebensdauer15 Jahre
Versand2 x 40HQ, um 15,400 kg
ANWENDUNGEN

Wo es passt

ThemenparksDestination parksResortsMessegeländeEntertainment complexes
WIE MAN ES SPEZIFIZIERT

Specify the UFO Flying Disco like a buyer, kein Katalog

Drei kurze Anmerkungen. Öffnen Sie das, was Sie brauchen – kein Verkaufsgespräch.

So lesen Sie die Zahlen, bevor Sie nach einem Preis fragen
01Fußabdruck & Abmessungen

Dieses Modell: 27 m x 13 M. Vergleichen Sie das mit Ihrer Website, plus Sicherheitsumschlag, die Warteschlange und der Wartungszugang.

02Kapazität & Durchsatz

Dieses Modell: 24 people per vehicle. Passen Sie den stündlichen Durchsatz an Ihr Spitzenfenster an, nicht Ihr Tagesdurchschnitt.

03Leistung & Dienstprogramme

Dieses Modell: 51.5 kW (44 kW running + 7.5 kW turntable). Ihr Transformator, Verkabelung und Kontrollraum müssen dazu passen. Alles, was fehlt, wird zu zusätzlichen Bau- oder Elektroarbeiten.

04Gewicht & Installation

Gesamtgewicht und Grundbedarf entscheiden über das Fundament, den Hebeplan und den Montageplan.

Welche Stufe passt zu Ihrem Projekt?
START STANDARD

Das Standardmodell

Es deckt bereits den Fußabdruck ab, Kapazität und Aussehen, die die meisten Parks, Einkaufszentren und Messen können betrieben werden.

BEWEGEN SIE SICH NACH OBEN

Höhere Kapazität oder Skalierung

Wählen Sie ein größeres Modell, wenn Ihr Spitzenfenster erreicht ist, Ihre Orientierungsposition oder Ihr Ticketpreis benötigen mehr Durchsatz.

Gehen Sie individuell

Thematisch oder individuell gestaltet

Beim Thema, Kapazität oder Standortbedingungen außerhalb des Standardbereichs liegen, Das Erscheinungsbild und die Konfiguration werden für Ihr Projekt entwickelt.

Was ist enthalten, und was separat zitiert wird
Üblicherweise im Lieferumfang enthalten
  • Die Ausrüstung und ihre Standardkonfiguration
  • Elektrische und mechanische Komponenten im Werk montiert
  • Werkstestlauf vor dem Versand
  • Packliste, Betriebs- und Wartungsdokumentation
  • Im Angebot angegebene Ersatzteile
Üblicherweise separat bestätigt
  • Internationale Fracht, Versicherung und Zoll
  • Standortfundament, Arbeiten an Beton- und Stahlfundamenten
  • Stromversorgung des Fahrgeschäfts und örtliche Elektroarbeiten
  • Montageüberwachung, Reise und Unterkunft
  • Lokale Inspektion, Zertifizierung und Betriebslizenzen

Bestätigen Sie die genaue Aufteilung pro Modell mit dem Vertriebsteam – der endgültige Umfang ist im Angebot angegeben.

Richtpreis ab Werk, ohne Steuern und Fracht. Eine Installationsanleitung ist im Lieferumfang enthalten. Die Produktion ist ca 35 Tage; Die Garantie beträgt ein Jahr kostenlos plus lebenslange Wartung.

PRODUKTDETAILS

Buying notes for the UFO Flying Disco

The flying disco coaster is the ride that turns a flat platform into a 33 km/h run. One vehicle of 24 riders climbs a curved rail, spins on a turntable at the top and comes back down the other side. If the plot suits a coaster instead, Die 180Ich bin eine verrückte Maus fits 17 X 28 M, und die flying turntable delivers a similar turn on a flat platform.

It stands 9.4 M, needs a 27 X 13 m plot and ships in two 40HQ containers. For a park adding its first high-energy ride, that is a compact package with a large presence.

24riders per vehicle
33 km/htop speed
9.4 MBetriebshöhe
27 X 13 Mland area
flying disco coaster running at vinpearl phu quoc in vietnam
flying disco ride installed at a park in alabama
flying disco coaster installed at lost island in iowa

What a flying disco does that a flat ride cannot

A flat ride turns you in place. This one turns you in place and moves you along a rail at the same time, so the two motions arrive together and the ride reads as a coaster from the walkway.

That combination is why operators call it a coaster even though it is a single vehicle on a short track. Visitors queue for the movement, not for the height.

Der 12.6 m rail radius defines your plot

The rail radius is 12.6 m and the land area is 27 X 13 M. Get the plot right before you compare prices, because the layout decides how much fencing, queue and landscaping the project needs.

The turntable at the top is 6.5 m across. It is where the ride slows, spins and turns back, and it is the part visitors photograph.

Layout note: Give the queue a view of the turntable rather than the back of the vehicle. The spin at the top is the moment people film, and a queue that can see it keeps its length.

Twenty-four riders, one vehicle

One vehicle carries 24 people and the operating time is two to three minutes, einstellbar. That cycle is short, so the queue moves, and the vehicle is large enough that a group boards in one turn.

Operating speed reaches 9.2 MS, um 33 km/h, with the turntable running up to 9.7 Drehzahl. In normal operation the turntable is set between 7 Und 8 Drehzahl, which is where most parks run it.

Antrieb und Kraft: 51.5 kW

The drive is 51.5 kW, split between a 44 kW running motor and a 7.5 kW turntable motor. Transmission is gear drive plus a friction wheel, a combination chosen for a rail this short.

The ride is a fixed installation on a 380 V-Versorgung, with a design service life of 15 Jahre. Confirm the cable route and the cabinet position while the foundation is still open.

Where it has been installed

Units from this range run at Vinpearl Phu Quoc in Vietnam, at Owa in Alabama and at Lost Island in Iowa. Those three sites cover a resort, a coastal park and a destination park, which is the range of settings the ride suits.

If your site is a city park with a lighter footfall pattern, Die 180m crazy mouse coaster gives a full circuit in a 17 X 28 m plot and is easier to justify on ticket income.

Price and delivery

The indicative factory price starts at US$78,500, shipping in 2 x 40HQ-Container bei ca 15,400 kg. Fracht, foundation and installation labour are quoted for your site.

Questions buyers ask about the flying disco

01

How fast does it go?

Bis zu 9.2 MS, um 33 km/h, with the turntable at up to 9.7 rpm and normally set between 7 Und 8 Drehzahl.

02

Wie viele Fahrer pro Zyklus?

Twenty-four in one vehicle. The operating time is two to three minutes and is adjustable.

03

Welche Stromversorgung wird benötigt?

51.5 kW on 380 V, made up of a 44 kW running motor and a 7.5 kW turntable motor.

04

How much land does it need?

A 27 X 13 m area with a 12.6 m rail radius. Plan the queue and fence outside that.

05

Is it a coaster or a flat ride?

It is a flat ride that behaves like a coaster: one vehicle, a curved rail and a turntable. Visitors read it as a coaster.

06

Was ist die Vorlaufzeit??

Um 35 Tage in der Produktion, then shipping in two containers and site assembly. Confirm the crane date with the quotation.

Technische Referenz: 24 riders per vehicle / Betriebsgeschwindigkeit 9.2 MS (33 km/h) / Betriebshöhe 9.4 M / rail height 9.2 M / rail radius 12.6 M / turntable diameter 6.5 M / turntable 9.7 rpm maximum, usually 7-8 Drehzahl / operating time 2-3 Minuten, einstellbar / fahren 51.5 kW (44 kW running + 7.5 kW turntable), gear and friction wheel transmission / Festinstallation / land area 27 X 13 M / Design Leben 15 Jahre / 2 x 40HQ bei ca 15,400 kg.

Teil der aufregende Fahrgeschäfte Sortiment von DINIS.

WAS SOLLTE EINGESCHLOSSEN WERDEN
  • Land
  • Größe oder Plan der Website
  • Drinnen oder draußen
  • Fahrten, die Sie im Sinn haben
  • Eröffnungsdatum

Lieber reden? WhatsApp uns, oder E-Mail [email protected]

Kontaktformular 1

Holen Sie sich ein kostenloses Angebot

HERSTELLUNG

Wo dieses Fahrgeschäft gebaut wird.

Präzises Schneiden, Zertifiziertes Schweißen, Sandstrahlen, mehrschichtige Einbrennlackierung, hauseigenes FRP, spezielle Inspektionsausrüstung, und ein vollständiger Testlauf, bevor der Container beladen wird.

01Präzisionsfertigung

Laserschneiden von Platten und Rohren, mit professionellen Schweißverfahren.

02Oberflächenschutz

Sandstrahlen plus mehrschichtiges Einbrennlackierungsverfahren, Das ist es, was das Finish bei einer Fahrt im Freien gewährleistet.

03Eigenes FRP

Glasfaserkomponenten werden im eigenen Haus aus Harz geformt, So passen thematische Teile zum fertigen Design.

04Inspektion und Prüfung

Ultraschall, Anweisungen zur Magnetpulver- und Penetrationsprüfung sowie ein spezielles Testfeld vor der Auslieferung.

VERWANDTE PRODUKTE

Weitere Produkte in dieser Richtung.