MANÈGES · SOLUTIONS PARCS · LIVRAISON MONDIALE
Manèges à sensations

UFO Flying Disco

The flying disco coaster is the ride that turns a flat platform into a 33 km/h run. One vehicle of 24 riders climbs a curved rail, spins on a turntable at the top and comes back down the other side. Si le…

Référence de prixFrom US$78,500
Capacité passagers24 people per vehicle
Vitesse de fonctionnement9.2 MS (33 km / h)
Hauteur de fonctionnement9.4 m
Rail height9.2 m
Discussion sur la personnalisationAccompagnement à la fabricationLivraison / conseils d'installation
POINTS FORTS

Pourquoi les acheteurs considèrent ce modèle

  • 24 riders per vehicle on a 12.6 m rail radius
  • 33 km/h with a turntable spin at the top
  • 9.4 m operating height on a 27 x 13 m intrigue
  • 51.5 kW drive with gear and friction wheel transmission
  • Running at Vinpearl Phu Quoc, Owa Alabama and Lost Island Iowa
DONNÉES TECHNIQUES

Spécifications vérifiées

Capacité passagers24 people per vehicle
Vitesse de fonctionnement9.2 MS (33 km / h)
Hauteur de fonctionnement9.4 m
Rail height9.2 m
Rail radius12.6 m
Diamètre de platine6.5 m
Turntable speed9.7 rpm maximum, usually 7-8 RPM
Operating time2-3 minutes, réglable
Puissance motrice51.5 kW (44 kW running + 7.5 kW turntable)
TransmissionGear drive and friction wheel
InstallationFixed
Land area27 m x 13 m
Design service life15 années
Expédition2 x 40 QG, à propos 15,400 kg
DEMANDES

Où il peut s'adapter

Parcs à thèmeDestination parksResortsFairgroundsEntertainment complexes
COMMENT LE SPÉCIFIER

Specify the UFO Flying Disco like a buyer, pas un catalogue

Trois courtes notes. Ouvrez celui dont vous avez besoin – pas de discours commercial.

Comment lire les chiffres avant de demander un prix
01Empreinte & dimensions

Ce modèle: 27 m x 13 m. Comparez cela avec votre site, plus l'enveloppe de sécurité, la file d'attente et l'accès à la maintenance.

02Capacité & débit

Ce modèle: 24 people per vehicle. Adaptez le débit horaire à votre fenêtre de pointe, pas votre moyenne quotidienne.

03Pouvoir & utilitaires

Ce modèle: 51.5 kW (44 kW running + 7.5 kW turntable). Votre transformateur, le câblage et la salle de contrôle doivent correspondre. Tout ce qui manque devient un travail civil ou électrique supplémentaire.

04Poids & installation

Le poids total et les exigences de base déterminent la fondation, le plan de levage et le planning d'installation.

Quel niveau correspond à votre projet
DÉMARRER LA NORME

Le modèle standard

Il couvre déjà l'empreinte, capacité et apparence que la plupart des parcs, les centres commerciaux et les foires peuvent fonctionner.

MONTER

Capacité ou échelle plus élevée

Choisissez un modèle plus grand lorsque votre fenêtre de pointe, votre position historique ou le prix de votre billet a besoin de plus de débit.

ALLER SUR MESURE

Construction thématique ou personnalisée

Quand le thème, la capacité ou les conditions du site se situent en dehors de la plage standard, l'apparence et la configuration sont conçues pour votre projet.

Ce qui est inclus, et ce qui est cité séparément
TYPIQUEMENT INCLUS
  • L'équipement et sa configuration standard
  • Composants électriques et mécaniques installés en usine
  • Test en usine avant expédition
  • Liste de colisage, documentation d'exploitation et d'entretien
  • Pièces de rechange indiquées dans le devis
TYPIQUEMENT CONFIRMÉ SÉPARÉMENT
  • Fret international, assurance et douane
  • Fondation du site, travaux de base en béton et en acier
  • Alimentation électrique du manège et travaux électriques locaux
  • Supervision des installations, voyage et hébergement
  • Inspection locale, certification et licences d'exploitation

Confirmez la répartition exacte par modèle avec l'équipe commerciale - le périmètre final est indiqué dans le devis.

Prix ​​usine indicatif, hors taxes et hors fret. Des instructions d'installation sont incluses. La production concerne 35 jours; la garantie est d'un an gratuit plus une maintenance à vie.

DÉTAILS DU PRODUIT

Buying notes for the UFO Flying Disco

The flying disco coaster is the ride that turns a flat platform into a 33 km/h run. One vehicle of 24 riders climbs a curved rail, spins on a turntable at the top and comes back down the other side. If the plot suits a coaster instead, le 180je suis une souris folle fits 17 x 28 m, et le platine volante delivers a similar turn on a flat platform.

It stands 9.4 m, needs a 27 x 13 m plot and ships in two 40HQ containers. For a park adding its first high-energy ride, that is a compact package with a large presence.

24riders per vehicle
33 km / htop speed
9.4 moperating height
27 x 13 mland area
flying disco coaster running at vinpearl phu quoc in vietnam
flying disco ride installed at a park in alabama
flying disco coaster installed at lost island in iowa

What a flying disco does that a flat ride cannot

A flat ride turns you in place. This one turns you in place and moves you along a rail at the same time, so the two motions arrive together and the ride reads as a coaster from the walkway.

That combination is why operators call it a coaster even though it is a single vehicle on a short track. Visitors queue for the movement, not for the height.

Le 12.6 m rail radius defines your plot

The rail radius is 12.6 m and the land area is 27 x 13 m. Get the plot right before you compare prices, because the layout decides how much fencing, queue and landscaping the project needs.

The turntable at the top is 6.5 m across. It is where the ride slows, spins and turns back, and it is the part visitors photograph.

Layout note: Give the queue a view of the turntable rather than the back of the vehicle. The spin at the top is the moment people film, and a queue that can see it keeps its length.

Twenty-four riders, one vehicle

One vehicle carries 24 people and the operating time is two to three minutes, réglable. That cycle is short, so the queue moves, and the vehicle is large enough that a group boards in one turn.

Operating speed reaches 9.2 MS, à propos 33 km / h, with the turntable running up to 9.7 RPM. In normal operation the turntable is set between 7 et 8 RPM, which is where most parks run it.

Entraînement et puissance: 51.5 kW

The drive is 51.5 kW, split between a 44 kW running motor and a 7.5 kW turntable motor. Transmission is gear drive plus a friction wheel, a combination chosen for a rail this short.

The ride is a fixed installation on a 380 V supply, with a design service life of 15 années. Confirm the cable route and the cabinet position while the foundation is still open.

Where it has been installed

Units from this range run at Vinpearl Phu Quoc in Vietnam, at Owa in Alabama and at Lost Island in Iowa. Those three sites cover a resort, a coastal park and a destination park, which is the range of settings the ride suits.

If your site is a city park with a lighter footfall pattern, le 180m crazy mouse coaster gives a full circuit in a 17 x 28 m plot and is easier to justify on ticket income.

Price and delivery

The indicative factory price starts at US$78,500, shipping in 2 x 40HQ containers at about 15,400 kg. Fret, foundation and installation labour are quoted for your site.

Questions buyers ask about the flying disco

01

How fast does it go?

Jusqu'à 9.2 MS, à propos 33 km / h, with the turntable at up to 9.7 rpm and normally set between 7 et 8 RPM.

02

How many riders per cycle?

Twenty-four in one vehicle. The operating time is two to three minutes and is adjustable.

03

What power supply is required?

51.5 kW on 380 V, made up of a 44 kW running motor and a 7.5 kW turntable motor.

04

How much land does it need?

UN 27 x 13 m area with a 12.6 m rail radius. Plan the queue and fence outside that.

05

Is it a coaster or a flat ride?

It is a flat ride that behaves like a coaster: one vehicle, a curved rail and a turntable. Visitors read it as a coaster.

06

What is the lead time?

À propos 35 days in production, then shipping in two containers and site assembly. Confirm the crane date with the quotation.

Référence technique: 24 riders per vehicle / operating speed 9.2 MS (33 km / h) / operating height 9.4 m / rail height 9.2 m / rail radius 12.6 m / turntable diameter 6.5 m / turntable 9.7 rpm maximum, usually 7-8 RPM / operating time 2-3 minutes, réglable / conduire 51.5 kW (44 kW running + 7.5 kW turntable), gear and friction wheel transmission / fixed installation / land area 27 x 13 m / design life 15 années / 2 x 40HQ at about 15,400 kg.

Part of the manèges à sensations range built by DINIS.

QUE FAIRE INCLURE
  • Pays
  • Taille ou plan du site
  • Intérieur ou extérieur
  • Les manèges que vous avez en tête
  • Date d'ouverture

Je préfère parler? WhatsApp nous, ou par email [email protected]

Formulaire de contact 1

Obtenez un devis gratuit

FABRICATION

Où ce manège est construit.

Découpe de précision, soudage certifié, sablage, peinture cuite multicouche, PRF interne, équipement d'inspection dédié, et un test complet avant le chargement du conteneur.

01Fabrication de précision

Découpe laser de plaques et tubes, avec des procédés de soudage professionnels.

02Protection des surfaces

Sablage et processus de peinture cuite multicouche, c'est ce qui maintient la finition lors d'une balade en plein air.

03FRP interne

Les composants en fibre de verre sont moulés en interne à partir de résine, pour que les pièces thématiques correspondent au design fini.

04Inspection et tests

Ultrasonique, instructions d'inspection des particules magnétiques et de pénétration ainsi qu'un champ de test dédié avant livraison.

PRODUITS CONNEXES

Plus de produits dans cette direction.