Fahrgeschäfte · PARK-LÖSUNGEN · GLOBALE LIEFERUNG
Große Fahrten

25m Drehturm

Ein mittelhoher Fallturm für 16 Reiter mit a 25 m Struktur und a 19.5 m Arbeitshöhe. Doppelhydraulikantrieb und eine Lebensdauer von 15 Jahren.

PreisreferenzAb 98.500 US-Dollar
Gerätehöhe25 Meter (ohne Blitzableiter)
Betriebsgeschwindigkeit6.1 MS
Betriebshöhe19.5 M
Schwenkdurchmesser3.8 M
Diskussion zur AnpassungFertigungsunterstützungLieferung / Installationsanleitung
WICHTIGSTE HIGHLIGHTS

Warum Käufer dieses Modell in Betracht ziehen

  • A 19.5 m Arbeitshöhe mit 16 Fahrer pro Zyklus
  • Passt zu einem 9 X 9 m Grundfläche
  • Wird in einem einzelnen 40HQ-Container versendet 12.6 T
  • 70 kW installierte Leistung an 380 V, 50 Hz
  • Hydraulischer Aufzug an 1.2 m/s mit a 6.1 m/s Abstieg
TECHNISCHE DATEN

Verifizierte Spezifikationen

Gerätehöhe25 Meter (ohne Blitzableiter)
Betriebsgeschwindigkeit6.1 MS
Betriebshöhe19.5 M
Schwenkdurchmesser3.8 M
Kapazität16 Menschen
Hubgeschwindigkeit1.2 MS
Abstiegsgeschwindigkeit6.1 MS
Antriebsleistung62.5 kW
Installierte Leistung70 kW (Antriebsleistung 62.5 kW)
Footage-Bereich9 m x 9 M
Gesamtgewicht14 T (ohne Hydrauliktank, Schaltschrank, und Gehäuse)
ANWENDUNGEN

Wo es passt

FamilienparksStadtparksResortsMessegeländeEinkaufszentren mit Außenbereich
WIE MAN ES SPEZIFIZIERT

Geben Sie den 25 m hohen Drehturm als Käufer an, kein Katalog

Drei kurze Anmerkungen. Öffnen Sie das, was Sie brauchen – kein Verkaufsgespräch.

So lesen Sie die Zahlen, bevor Sie nach einem Preis fragen
01Fußabdruck & Abmessungen

Dieses Modell: 9 m x 9 M. Vergleichen Sie das mit Ihrer Website, plus Sicherheitsumschlag, die Warteschlange und der Wartungszugang.

02Kapazität & Durchsatz

Dieses Modell: 16 Menschen. Passen Sie den stündlichen Durchsatz an Ihr Spitzenfenster an, nicht Ihr Tagesdurchschnitt.

03Leistung & Dienstprogramme

Dieses Modell: 62.5 kW. Ihr Transformator, Verkabelung und Kontrollraum müssen dazu passen. Alles, was fehlt, wird zu zusätzlichen Bau- oder Elektroarbeiten.

04Gewicht & Installation

Dieses Modell: 14 T (ohne Hydrauliktank, Schaltschrank, und Gehäuse). Gewicht und Grundanforderungen entscheiden über das Fundament, der Kran und die Montagetage.

Welche Stufe passt zu Ihrem Projekt?
START STANDARD

Das Standardmodell

Es deckt bereits den Fußabdruck ab, Kapazität und Aussehen, die die meisten Parks, Einkaufszentren und Messen können betrieben werden.

BEWEGEN SIE SICH NACH OBEN

Höhere Kapazität oder Skalierung

Wählen Sie ein größeres Modell, wenn Ihr Spitzenfenster erreicht ist, Ihre Orientierungsposition oder Ihr Ticketpreis benötigen mehr Durchsatz.

Gehen Sie individuell

Thematisch oder individuell gestaltet

Beim Thema, Kapazität oder Standortbedingungen außerhalb des Standardbereichs liegen, Das Erscheinungsbild und die Konfiguration werden für Ihr Projekt entwickelt.

Was ist enthalten, und was separat zitiert wird
Üblicherweise im Lieferumfang enthalten
  • Die Ausrüstung und ihre Standardkonfiguration
  • Elektrische und mechanische Komponenten im Werk montiert
  • Werkstestlauf vor dem Versand
  • Packliste, Betriebs- und Wartungsdokumentation
  • Im Angebot angegebene Ersatzteile
Üblicherweise separat bestätigt
  • Internationale Fracht, Versicherung und Zoll
  • Standortfundament, Arbeiten an Beton- und Stahlfundamenten
  • Stromversorgung des Fahrgeschäfts und örtliche Elektroarbeiten
  • Montageüberwachung, Reise und Unterkunft
  • Lokale Inspektion, Zertifizierung und Betriebslizenzen

Bestätigen Sie die genaue Aufteilung pro Modell mit dem Vertriebsteam – der endgültige Umfang ist im Angebot angegeben.

Richtpreis ab Werk, ohne Steuern und Fracht. Eine Installationsanleitung ist im Lieferumfang enthalten. Die Produktion ist ca 35 Tage; Die Garantie beträgt ein Jahr kostenlos plus lebenslange Wartung.

PRODUKTDETAILS

Kaufhinweise für den 25 m hohen Drehturm

Two numbers decide whether a 25m rotating tower is the right step for your park: 19.5 m of operating height for 16 Reiter, und a 9 X 9 m base that ships in a single 40HQ container.

That combination puts a genuine tower ride into projects that cannot carry the freight and the civil programme of a taller model.

19.5 MBetriebshöhe
16Fahrer pro Zyklus
9 X 9 MFußabdruck
1 x 40HQshipping volume
rotating tower ride standing in an amusement park
free fall adrenaline ride for parks in operation
rotating tower ride running for visitors at a park

Warum der 25-m-Turm die preiswerteste Stufe im Sortiment ist

Height sells tickets, but freight and foundation decide the budget. The 25m tower reaches 19.5 m of operating height from a 9 X 9 m base and arrives in one container, so the money goes into the ride rather than into transport and civil work.

The structure stands 25 m before the lightning rod. For most city parks and resorts that is tall enough to be the landmark without turning the ride into a planning-case project.

One container changes the freight and the schedule

A single 40HQ keeps the logistics simple: one booking, one unloading crane and one set of customs documents. The ride travels at about 12.6 T, so a standard mobile crane handles the lift on delivery day.

Freight tip: Ask for a door-to-door figure rather than a port-to-port one. On a single container the inland leg is often the part buyers forget to budget.

If you are comparing the towers, Die 35m rotierender Turm needs three containers and a heavier crane. That is the real cost of the extra height, and it is worth writing down next to the price difference.

Sechzehn Fahrer pro Zyklus: what that does to a peak-hour queue

With 16 Sitze und a 2.5 Zu 3 minute cycle, plan for roughly 250 Zu 320 riders an hour at a steady load factor. On a busy weekend that is enough to keep a queue moving without a long wait.

Der Lift fährt um 1.2 MS, which keeps the cycle predictable: visitors know how long they will stand in line, and that is what stops people walking away.

The descent is the ride

braking system principle of a rotating drop tower ride

The cabin climbs at 1.2 m/s and comes down at 6.1 MS. The descent is the moment visitors talk about, and the braking system is what makes it repeatable cycle after cycle.

When you compare suppliers, ask how the braking system is tested at the factory and what the maintenance interval is. Both answers belong in the quotation, not in a phone call after the ride is running.

25m rotating tower price and what the step up buys

The indicative factory price starts at US$98,500. Against the 15m rotierender Turm you are buying height, capacity and a stronger cabin cycle; against the 35m tower you are buying a shorter schedule and a much lighter freight bill.

STEP DOWN

What the 15m tower saves

A 12-person cabin, ein 8 X 8 m base and a lower entry price. It suits indoor positions and tight plots where the 25m tower’s 9 X 9 m base will not sit comfortably.

STEP UP

What the 35m tower adds

28.5 m of operating height on dual hydraulic cylinders and a skyline presence the 25m tower cannot match, at the cost of three containers and a heavier foundation.

Questions buyers ask about the 25m rotating tower

01

How many riders per hour can we expect?

Plan for roughly 250 Zu 320 mit einem 2.5 Zu 3 minute cycle. Send us the peak-hour figure you are working to and we will check the cycle against your layout.

02

What power supply does it need?

70 kW installed with a 62.5 kW-Antrieb, An 380 V und 50 Hz. Confirm the supply on site before the order so the cabinet is built for your voltage.

03

How much does the tower weigh?

Um 14 t excluding the hydraulic tank, the electrical cabinet and the enclosure. The foundation drawing lists the loads the base has to take.

04

Does it fit indoor positions?

The structure stands 25 M, so it belongs outdoors. Indoor projects are better served by the 15m rotierender Turm.

05

How long does installation take?

One container arrives, one crane lifts the sections, then assembly and the test run. The exact window depends on your site access, and it is confirmed with the quotation.

06

What is the after-sales package?

One year free of charge plus lifetime maintenance support, with a recommended spare-parts list available with the quotation.

Technische Referenz: structure height 25 m ohne Blitzableiter / Betriebshöhe 19.5 M / 16 Menschen / Aufzug 1.2 MS / descent 6.1 MS / Schwenkdurchmesser 3.8 M / installed power 70 kW (drive 62.5 kW) / weight about 14 T / Fußabdruck 9 X 9 M / 1 x 40HQ.

For a taller tower in the same range, siehe die free fall ride und die towers and drop rides collection.

WAS SOLLTE EINGESCHLOSSEN WERDEN
  • Land
  • Größe oder Plan der Website
  • Drinnen oder draußen
  • Fahrten, die Sie im Sinn haben
  • Eröffnungsdatum

Lieber reden? WhatsApp uns, oder E-Mail [email protected]

Kontaktformular 1

Holen Sie sich ein kostenloses Angebot

HERSTELLUNG

Wo dieses Fahrgeschäft gebaut wird.

Präzises Schneiden, Zertifiziertes Schweißen, Sandstrahlen, mehrschichtige Einbrennlackierung, hauseigenes FRP, spezielle Inspektionsausrüstung, und ein vollständiger Testlauf, bevor der Container beladen wird.

01Präzisionsfertigung

Laserschneiden von Platten und Rohren, mit professionellen Schweißverfahren.

02Oberflächenschutz

Sandstrahlen plus mehrschichtiges Einbrennlackierungsverfahren, Das ist es, was das Finish bei einer Fahrt im Freien gewährleistet.

03Eigenes FRP

Glasfaserkomponenten werden im eigenen Haus aus Harz geformt, So passen thematische Teile zum fertigen Design.

04Inspektion und Prüfung

Ultraschall, Anweisungen zur Magnetpulver- und Penetrationsprüfung sowie ein spezielles Testfeld vor der Auslieferung.

VERWANDTE PRODUKTE

Weitere Produkte in dieser Richtung.