Fahrgeschäfte · PARK-LÖSUNGEN · GLOBALE LIEFERUNG
Turmfahrten

Samba Tower

A samba tower is the ride that lets a family board together. Each cabin takes two adults and two children, so parents ride with their children instead of waiting at the fence. Eight cabins carry 32 Reiter zu einem 6.5 m operating…

PreisreferenzFrom US$74,000
Gerätehöhe12 M
Betriebshöhe6.5 M
SchwenkdurchmesserUm 8.3 M
Number of cabins8
Diskussion zur AnpassungFertigungsunterstützungLieferung / Installationsanleitung
WICHTIGSTE HIGHLIGHTS

Warum Käufer dieses Modell in Betracht ziehen

  • 32 riders per cycle in 8 family cabins
  • Two adults and two children share one cabin
  • 6.5 m operating height with a 12 m Struktur
  • 20 kW installed power on a standard park supply
  • Ships in one 40HQ container at about 4,600 kg
TECHNISCHE DATEN

Verifizierte Spezifikationen

Gerätehöhe12 M
Betriebshöhe6.5 M
SchwenkdurchmesserUm 8.3 M
Number of cabins8
Capacity per cabin2 adults + 2 children, oder 4 children
Total capacity32 Menschen
Live load per cabinBis zu 220 kg
Rotationskraft3 kW
Hydraulic pump15 kW
Beleuchtung2 kW
Gesamtleistung20 kW
Operating time2-3 Minuten, einstellbar
InstallationFixed
Operating temperature0-40 C
Versand1 x 40HQ, um 4,600 kg
ANWENDUNGEN

Wo es passt

FamilienparksStadtparksResortsShopping centresMessegelände
WIE MAN ES SPEZIFIZIERT

Specify the Samba Tower like a buyer, kein Katalog

Drei kurze Anmerkungen. Öffnen Sie das, was Sie brauchen – kein Verkaufsgespräch.

So lesen Sie die Zahlen, bevor Sie nach einem Preis fragen
01Fußabdruck & Abmessungen

Vergleichen Sie die erforderliche Fläche mit Ihrer Website, plus Sicherheitsumschlag, Warteschlangenplatz und Wartungszugang.

02Kapazität & Durchsatz

Dieses Modell: 8. Passen Sie den stündlichen Durchsatz an Ihr Spitzenfenster an, nicht Ihr Tagesdurchschnitt.

03Leistung & Dienstprogramme

Dieses Modell: 3 kW. Ihr Transformator, Verkabelung und Kontrollraum müssen dazu passen. Alles, was fehlt, wird zu zusätzlichen Bau- oder Elektroarbeiten.

04Gewicht & Installation

Gesamtgewicht und Grundbedarf entscheiden über das Fundament, den Hebeplan und den Montageplan.

Welche Stufe passt zu Ihrem Projekt?
START STANDARD

Das Standardmodell

Es deckt bereits den Fußabdruck ab, Kapazität und Aussehen, die die meisten Parks, Einkaufszentren und Messen können betrieben werden.

BEWEGEN SIE SICH NACH OBEN

Höhere Kapazität oder Skalierung

Wählen Sie ein größeres Modell, wenn Ihr Spitzenfenster erreicht ist, Ihre Orientierungsposition oder Ihr Ticketpreis benötigen mehr Durchsatz.

Gehen Sie individuell

Thematisch oder individuell gestaltet

Beim Thema, Kapazität oder Standortbedingungen außerhalb des Standardbereichs liegen, Das Erscheinungsbild und die Konfiguration werden für Ihr Projekt entwickelt.

Was ist enthalten, und was separat zitiert wird
Üblicherweise im Lieferumfang enthalten
  • Die Ausrüstung und ihre Standardkonfiguration
  • Elektrische und mechanische Komponenten im Werk montiert
  • Werkstestlauf vor dem Versand
  • Packliste, Betriebs- und Wartungsdokumentation
  • Im Angebot angegebene Ersatzteile
Üblicherweise separat bestätigt
  • Internationale Fracht, Versicherung und Zoll
  • Standortfundament, Arbeiten an Beton- und Stahlfundamenten
  • Stromversorgung des Fahrgeschäfts und örtliche Elektroarbeiten
  • Montageüberwachung, Reise und Unterkunft
  • Lokale Inspektion, Zertifizierung und Betriebslizenzen

Bestätigen Sie die genaue Aufteilung pro Modell mit dem Vertriebsteam – der endgültige Umfang ist im Angebot angegeben.

Richtpreis ab Werk, ohne Steuern und Fracht. Eine Installationsanleitung ist im Lieferumfang enthalten. Die Produktion ist ca 35 Tage; Die Garantie beträgt ein Jahr kostenlos plus lebenslange Wartung.

PRODUKTDETAILS

Buying notes for the Samba Tower

A samba tower is the ride that lets a family board together. Each cabin takes two adults and two children, so parents ride with their children instead of waiting at the fence.

Eight cabins carry 32 Reiter zu einem 6.5 m operating height on 20 kW of installed power, and the whole ride ships in one 40HQ container.

32Fahrer pro Zyklus
8family cabins
6.5 MBetriebshöhe
1 x 40HQshipping volume
samba tower ride with balloon gondolas lifting riders
samba tower ride built for family parks and resorts

A tower ride families can share

Most tower rides split the queue: children ride, adults watch. The samba tower is built the other way round. A cabin holds two adults and two children, or four children, with a live load of up to 220 kg.

That changes the ticket. A family buys four seats at once, the ride photographs well, and parents do not spend the cycle standing at the fence with a phone.

Eight cabins, thirty-two riders

A cycle runs two to three minutes and is adjustable, so you can shorten it on a busy afternoon and lengthen it when the park is quiet.

With eight cabins and a three minute cycle, plan for roughly 500 Zu 600 riders an hour at a steady load factor. That is a family ride throughput on a footprint of about 8.3 M.

Lift, rotate and oscillate

The ride does three things at once: the cabins lift, the platform rotates and each cabin swings. It is gentle enough for children and lively enough that teenagers ride it twice.

Because the motion is hydraulic rather than a free fall, the ride suits parks where the 35m rotierender Turm is too intense for the audience you have.

Space and power: 8.3 m und 20 kW

The structure stands 12 m and the slewing diameter is about 8.3 M. Plan the fence and the queue outside that circle, plus the access route for one container and a crane.

Installierte Leistung ist 20 kW: 3 kW for rotation, 15 kW for the hydraulic pump and 2 kW for lighting. That is a standard park supply, and the lighting load is light enough to run the ride into the evening.

The stated operating range is 0 Zu 40 C. If your site sits outside it, tell us at the quotation stage.

Price and shipping

The indicative factory price starts at US$74,000, shipping in one 40HQ container at about 4,600 kg. Foundation work, freight and installation labour are quoted for your site.

If you are building a family zone, the samba tower sits well next to the Kinderkarussell und die Big Merry gehen: three rides with different motions and one shared queue area.

Questions buyers ask about the samba tower

01

How many people ride at once?

Zweiunddreißig, in eight cabins. Each cabin takes two adults and two children, or four children, bis zu 220 kg.

02

Is it suitable for young children?

It is designed for families. Your local rules set the height and age limits, and we supply the figures for the application.

03

What power supply does it need?

20 kW in total on a standard three-phase supply. Send us your voltage and frequency before the order.

04

How much space does it need?

A structure 12 m tall with a slewing diameter of about 8.3 M, plus the fence line and the queue.

05

Does it run in the rain?

It is a fixed outdoor ride and runs in normal weather. Check the wind limit in your local code for the operating rule.

06

What is the lead time?

Um 35 days in production, then sea freight and site assembly. One container keeps the delivery simple.

Technische Referenz: structure height 12 M / Betriebshöhe 6.5 M / slewing diameter about 8.3 M / 8 Hütten / 2 adults + 2 children or 4 children per cabin / 32 Reiter / live load per cabin up to 220 kg / rotation 3 kW, hydraulic pump 15 kW, Beleuchtung 2 kW, total 20 kW / cycle 2-3 Minuten, einstellbar / fixed installation / operating temperature 0-40 C / 1 x 40HQ at about 4,600 kg.

Part of the towers and drop rides range built by DINIS.

WAS SOLLTE EINGESCHLOSSEN WERDEN
  • Land
  • Größe oder Plan der Website
  • Drinnen oder draußen
  • Fahrten, die Sie im Sinn haben
  • Eröffnungsdatum

Lieber reden? WhatsApp uns, oder E-Mail [email protected]

Kontaktformular 1

Holen Sie sich ein kostenloses Angebot

HERSTELLUNG

Wo dieses Fahrgeschäft gebaut wird.

Präzises Schneiden, Zertifiziertes Schweißen, Sandstrahlen, mehrschichtige Einbrennlackierung, hauseigenes FRP, spezielle Inspektionsausrüstung, und ein vollständiger Testlauf, bevor der Container beladen wird.

01Präzisionsfertigung

Laserschneiden von Platten und Rohren, mit professionellen Schweißverfahren.

02Oberflächenschutz

Sandstrahlen plus mehrschichtiges Einbrennlackierungsverfahren, Das ist es, was das Finish bei einer Fahrt im Freien gewährleistet.

03Eigenes FRP

Glasfaserkomponenten werden im eigenen Haus aus Harz geformt, So passen thematische Teile zum fertigen Design.

04Inspektion und Prüfung

Ultraschall, Anweisungen zur Magnetpulver- und Penetrationsprüfung sowie ein spezielles Testfeld vor der Auslieferung.

VERWANDTE PRODUKTE

Weitere Produkte in dieser Richtung.