Fahrgeschäfte · PARK-LÖSUNGEN · GLOBALE LIEFERUNG
Große Fahrten

35m Drehturm

Der höchste Turm der Reihe, mit einem 32.4 m Struktur, 16-Personenkapazität und zwei Hydraulikzylinder. Zielt auf die Positionierung von Wahrzeichen in größeren Parks ab.

PreisreferenzAb 155.000 US-Dollar
Ausrüstungshöhe32.4M
Betriebshöhe28.5M
Betriebsgeschwindigkeit6.1MS
Hubgeschwindigkeit1.2MS
Diskussion zur AnpassungFertigungsunterstützungLieferung / Installationsanleitung
WICHTIGSTE HIGHLIGHTS

Warum Käufer dieses Modell in Betracht ziehen

  • A 32.4 m Struktur mit a 28.5 m Arbeitshöhe
  • Sechzehn Fahrer pro Zyklus auf zwei Hydraulikzylindern
  • 11 X 8 m Stellfläche für eine bahnbrechende Fahrt
  • 90 kW installierte Leistung, 80.5 kW-Antrieb
  • Versand erfolgt 3 x 40HQ-Container bei ca 22.6 T
TECHNISCHE DATEN

Verifizierte Spezifikationen

Ausrüstungshöhe32.4M
Betriebshöhe28.5M
Betriebsgeschwindigkeit6.1MS
Hubgeschwindigkeit1.2MS
Abstiegsgeschwindigkeit≤4m/s
Schwenkdurchmesser3.9M
Anzahl der Kabinen1
Gesamtkapazität16 Menschen
Antriebsleistung80.5KW (75KW + 5.5KW)
Installierte Kapazität90KW
Footage-Bereich11M * 8M
ÜbertragungsmethodeDoppelhydraulikzylinder
Lebensdauer15 Jahre
ANWENDUNGEN

Wo es passt

ThemenparksStadtparksResortsMalerische GebieteGroßes Messegelände
WIE MAN ES SPEZIFIZIERT

Geben Sie den 35 m hohen Drehturm als Käufer an, kein Katalog

Drei kurze Anmerkungen. Öffnen Sie das, was Sie brauchen – kein Verkaufsgespräch.

So lesen Sie die Zahlen, bevor Sie nach einem Preis fragen
01Fußabdruck & Abmessungen

Dieses Modell: 11M * 8M. Vergleichen Sie das mit Ihrer Website, plus Sicherheitsumschlag, die Warteschlange und der Wartungszugang.

02Kapazität & Durchsatz

Dieses Modell: 1. Passen Sie den stündlichen Durchsatz an Ihr Spitzenfenster an, nicht Ihr Tagesdurchschnitt.

03Leistung & Dienstprogramme

Dieses Modell: 80.5KW (75KW + 5.5KW). Ihr Transformator, Verkabelung und Kontrollraum müssen dazu passen. Alles, was fehlt, wird zu zusätzlichen Bau- oder Elektroarbeiten.

04Gewicht & Installation

Gesamtgewicht und Grundbedarf entscheiden über das Fundament, den Hebeplan und den Montageplan.

Welche Stufe passt zu Ihrem Projekt?
START STANDARD

Das Standardmodell

Es deckt bereits den Fußabdruck ab, Kapazität und Aussehen, die die meisten Parks, Einkaufszentren und Messen können betrieben werden.

BEWEGEN SIE SICH NACH OBEN

Höhere Kapazität oder Skalierung

Wählen Sie ein größeres Modell, wenn Ihr Spitzenfenster erreicht ist, Ihre Orientierungsposition oder Ihr Ticketpreis benötigen mehr Durchsatz.

Gehen Sie individuell

Thematisch oder individuell gestaltet

Beim Thema, Kapazität oder Standortbedingungen außerhalb des Standardbereichs liegen, Das Erscheinungsbild und die Konfiguration werden für Ihr Projekt entwickelt.

Was ist enthalten, und was separat zitiert wird
Üblicherweise im Lieferumfang enthalten
  • Die Ausrüstung und ihre Standardkonfiguration
  • Elektrische und mechanische Komponenten im Werk montiert
  • Werkstestlauf vor dem Versand
  • Packliste, Betriebs- und Wartungsdokumentation
  • Im Angebot angegebene Ersatzteile
Üblicherweise separat bestätigt
  • Internationale Fracht, Versicherung und Zoll
  • Standortfundament, Arbeiten an Beton- und Stahlfundamenten
  • Stromversorgung des Fahrgeschäfts und örtliche Elektroarbeiten
  • Montageüberwachung, Reise und Unterkunft
  • Lokale Inspektion, Zertifizierung und Betriebslizenzen

Bestätigen Sie die genaue Aufteilung pro Modell mit dem Vertriebsteam – der endgültige Umfang ist im Angebot angegeben.

Richtpreis ab Werk, ohne Steuern und Fracht. Eine Installationsanleitung ist im Lieferumfang enthalten. Die Produktion ist ca 35 Tage; Die Garantie beträgt ein Jahr kostenlos plus lebenslange Wartung.

PRODUKTDETAILS

Kaufhinweise für den 35 m hohen Drehturm

A 35m rotating tower changes what the skyline of your park looks like. The structure stands 32.4 M, the cabin reaches 28.5 m and sixteen riders see the whole site turn under them.

It is also the point in the range where approvals, foundation design and the delivery plan start to matter as much as the ride itself. Buyers who plan those three things early get the tower open on schedule.

28.5 MBetriebshöhe
32.4 Mstructure height
2hydraulic cylinders
3 x 40HQshipping volume
tall rotating tower ride installed outdoors at a park
rotating tower ride assembled at the dinis factory
popular rotating tower ride running for park visitors

A 32.4 m landmark: answer the approval question first

Every market asks the same questions about a tall ride, so it pays to prepare the answers before you sign. These are the five items the authority usually wants.

  • The equipment classification and the height certificate for the finished structure
  • A foundation design signed by an engineer registered in your own market
  • Wind and seismic data for the site, taken from your local code
  • The documentation set that ships with the ride
  • Operating, inspection and maintenance manuals for the safety review

Send us your local requirements at the quotation stage. The engineering drawings are prepared for review, and answering the questions before production starts is what keeps the delivery date honest.

THE NUMBER THAT SELLS TICKETS28.5 m of operating height

Visitors see the tower from the car park before they reach the gate. That sightline is the reason the 35m model works as an anchor, and it is also the reason to give it a position on the main axis of the park.

Doppelhydraulikzylinder: was es für Ihr Team bedeutet

The lift runs on two hydraulic cylinders rather than one, with a descent capped at 4 MS. For a ride this tall that arrangement is the difference between a single point of reliance and a system your maintenance team can inspect cylinder by cylinder.

Ask for the inspection interval and the pressure test record in the maintenance manual, and put both into your service schedule from the first week. A hydraulic cylinder is a serviceable component, and planning the service is cheaper than discovering it.

Raum, Fundament und Heben

The footprint is 11 X 8 m and the ride weighs about 22.6 T, so the base plate is a real civil item rather than a pad. Order the foundation drawing with the ride and have it reviewed locally. If the tower is going through a planning review, drop tower height and approval lists what the authority asks for.

tall rotating tower ride installed in a city park

Delivery is three 40HQ containers. Check the access road twice: once for the container truck and once for the crane that lifts the sections. Sites where the crane cannot reach the base are the ones that lose a week.

Installed capacity is 90 kW mit einem 80.5 kW drive on a standard 380 V supply. Confirm the cable route from the substation to the cabinet while the foundation is still open.

Ist der höhere Turm die zusätzliche Fracht wert??

Verglichen mit dem 25m rotierender Turm you are paying for nine metres of operating height, three containers instead of one and a heavier foundation. The trade is straightforward: the taller ride draws visitors from further away and gives your park a landmark for photographs and advertising.

If the site cannot take the foundation or the crane, look at the 63m Freifallfahrt und die 42m flying sky before you compromise on the position of this tower. Both are designed for sites where the vertical landmark is the whole point.

Questions buyers ask about the 35m rotating tower

01

Wie hoch geht die Kabine eigentlich??

Die Arbeitshöhe beträgt 28.5 Ich bin auf einem 32.4 m Struktur. Tell us the site and we will send the drawing set for your planning submission.

02

What does the foundation need to carry?

Um 22.6 t of equipment, plus dynamic loads. The foundation drawing states the figures and a local engineer should sign off the design.

03

When is a crane needed?

The three containers arrive together and the sections are lifted onto the base. Plan one crane window and keep the access road clear for it.

04

What power supply is required?

90 kW installed with an 80.5 kW-Antrieb, 380 V. Send us your voltage and frequency before the order and we will match the control cabinet.

05

Is it safe in strong wind?

The ride is designed and tested for defined wind conditions, and your local code sets the operating limit for the site. Both figures come with the documentation set.

06

How does it compare with the 25m tower?

Nine metres more operating height, three containers instead of one and a heavier base. Der 25m rotierender Turm is the better first tower; this one is the landmark.

Technische Referenz: structure height 32.4 M / Betriebshöhe 28.5 M / 16 Menschen / operating speed 6.1 MS / Aufzug 1.2 MS / descent within 4 MS / Schwenkdurchmesser 3.9 M / Antriebsleistung 80.5 kW (75 + 5.5 kW) / installed capacity 90 kW / Fußabdruck 11 X 8 M / Doppelhydraulikzylinder / service life 15 Jahre / 3 x 40HQ.

Part of the towers and drop rides range built by DINIS.

WAS SOLLTE EINGESCHLOSSEN WERDEN
  • Land
  • Größe oder Plan der Website
  • Drinnen oder draußen
  • Fahrten, die Sie im Sinn haben
  • Eröffnungsdatum

Lieber reden? WhatsApp uns, oder E-Mail [email protected]

Kontaktformular 1

Holen Sie sich ein kostenloses Angebot

HERSTELLUNG

Wo dieses Fahrgeschäft gebaut wird.

Präzises Schneiden, Zertifiziertes Schweißen, Sandstrahlen, mehrschichtige Einbrennlackierung, hauseigenes FRP, spezielle Inspektionsausrüstung, und ein vollständiger Testlauf, bevor der Container beladen wird.

01Präzisionsfertigung

Laserschneiden von Platten und Rohren, mit professionellen Schweißverfahren.

02Oberflächenschutz

Sandstrahlen plus mehrschichtiges Einbrennlackierungsverfahren, Das ist es, was das Finish bei einer Fahrt im Freien gewährleistet.

03Eigenes FRP

Glasfaserkomponenten werden im eigenen Haus aus Harz geformt, So passen thematische Teile zum fertigen Design.

04Inspektion und Prüfung

Ultraschall, Anweisungen zur Magnetpulver- und Penetrationsprüfung sowie ein spezielles Testfeld vor der Auslieferung.

VERWANDTE PRODUKTE

Weitere Produkte in dieser Richtung.