MANÈGES · SOLUTIONS PARCS · LIVRAISON MONDIALE
Parc extérieur non alimenté

Outdoor Unpowered Play Zone

An unpowered play zone is the part of a park that runs all day without a motor, a control panel or an operator. Slides, climbing nets, jump pillows and obstacle courses do the work, and visitors set their own pace. Two recent…

PortéeMise en page, structures, surface specification and installation guidance
StructuresSlides, tours, climbing nets, jump equipment, obstacle courses
Power requirementNone for the play equipment
StaffingNo operator required for the equipment
Discussion sur la personnalisationAccompagnement à la fabricationLivraison / conseils d'installation
POINTS FORTS

Pourquoi les acheteurs considèrent ce modèle

  • Slides, climbing structures and jump equipment in one zone
  • No motors, no control system and no operator roster
  • Layout drawn to your plot and your age group
  • Safety surface specified to each structure's fall height
  • Designed to grow in phases without moving phase one
DONNÉES TECHNIQUES

Spécifications vérifiées

PortéeMise en page, structures, surface specification and installation guidance
StructuresSlides, tours, climbing nets, jump equipment, obstacle courses
Power requirementNone for the play equipment
StaffingNo operator required for the equipment
ConceptionDrawn to the plot, the age group and the fall heights
DEMANDES

Où il peut s'adapter

ResortsScenic areasParcs familiauxCamping parksCity parks
COMMENT LE SPÉCIFIER

Specify the Outdoor Unpowered Play Zone like a buyer, pas un catalogue

Trois courtes notes. Ouvrez celui dont vous avez besoin – pas de discours commercial.

Comment lire les chiffres avant de demander un prix
01Empreinte & dimensions

Vérifiez la zone requise par rapport à votre site, plus l'enveloppe de sécurité, espace de file d'attente et accès à la maintenance.

02Capacité & débit

Les sièges par cycle et la durée du cycle définissent le débit horaire réaliste. Faites-le correspondre à votre fenêtre de pointe, pas la moyenne quotidienne.

03Pouvoir & utilitaires

Ce modèle: None for the play equipment. Votre transformateur, le câblage et la salle de contrôle doivent correspondre. Tout ce qui manque devient un travail civil ou électrique supplémentaire.

04Poids & installation

Le poids total et les exigences de base déterminent la fondation, le plan de levage et le planning d'installation.

Quel niveau correspond à votre projet
DÉMARRER LA NORME

Le modèle standard

Il couvre déjà l'empreinte, capacité et apparence que la plupart des parcs, les centres commerciaux et les foires peuvent fonctionner.

MONTER

Capacité ou échelle plus élevée

Choisissez un modèle plus grand lorsque votre fenêtre de pointe, votre position historique ou le prix de votre billet a besoin de plus de débit.

ALLER SUR MESURE

Construction thématique ou personnalisée

Quand le thème, la capacité ou les conditions du site se situent en dehors de la plage standard, l'apparence et la configuration sont conçues pour votre projet.

Ce qui est inclus, et ce qui est cité séparément
TYPIQUEMENT INCLUS
  • L'équipement et sa configuration standard
  • Composants électriques et mécaniques installés en usine
  • Test en usine avant expédition
  • Liste de colisage, documentation d'exploitation et d'entretien
  • Pièces de rechange indiquées dans le devis
TYPIQUEMENT CONFIRMÉ SÉPARÉMENT
  • Fret international, assurance et douane
  • Fondation du site, travaux de base en béton et en acier
  • Alimentation électrique du manège et travaux électriques locaux
  • Supervision des installations, voyage et hébergement
  • Inspection locale, certification et licences d'exploitation

Confirmez la répartition exacte par modèle avec l'équipe commerciale - le périmètre final est indiqué dans le devis.

Prix ​​usine indicatif, hors taxes et hors fret. Des instructions d'installation sont incluses. La production concerne 35 jours; la garantie est d'un an gratuit plus une maintenance à vie.

DÉTAILS DU PRODUIT

Buying notes for the Outdoor Unpowered Play Zone

An unpowered play zone is the part of a park that runs all day without a motor, a control panel or an operator. Slides, climbing nets, jump pillows and obstacle courses do the work, and visitors set their own pace. Two recent projects show how that works in practice: I-City in Malaysia et Home Invest in the Philippines.

DINIS designs and builds these zones as a package: mise en page, structures, safety surface and installation, sized to the plot you have.

outdoor unpowered play zone with large slides and climbing structures
climbing nets and jumping equipment in an outdoor play zone
unpowered playground structures built for family parks

What goes into an unpowered play zone

SLIDES

Large slides and tower combinations

Tower platforms with spiral or straight slides, sized by the height the site allows. They are the centrepiece of most zones and the first thing visitors photograph.

CLIMBING

Nets, walls and rope courses

Climbing structures for different ages, from low nets for younger children to taller rope courses that hold teenagers for half an hour.

JUMPING

Jump pillows and trampoline beds

Inflatable or sprung jump surfaces that take a large number of children at once with no queue and no operator.

Why parks add unpowered play

Powered rides earn per ticket. An unpowered zone earns by keeping families on site: children play for an hour, parents buy food and drink, and the visit lasts longer than the ride tokens do.

It also runs without staff and without power. There is no operating roster, no control system and no ride cycle to manage, which is why the zone suits resorts, scenic areas and camping parks that do not want a ride operation.

Sizing the zone to your site

Start with the plot and the age group, not with a catalogue of structures. A zone for children under six needs different equipment from a zone aimed at eight to fourteen year olds, and mixing the two without separation creates conflict.

  1. Send the plot plan

    Forme, slope, access and the position of trees or buildings all change the layout.

  2. Agree the age group

    One zone for younger children, one for older, or a single zone with separated areas.

  3. Receive the layout

    We return a drawing with the structures positioned, the circulation routes and the safety surface marked.

  4. Production and installation

    Structures are produced to the drawing, shipped, and installed with the surface work.

Safety surface and inspection

The surface under the equipment matters as much as the equipment. Impact-absorbing surfaces are specified to the fall height of each structure, and the drawing states where each one is needed.

Ask for the maintenance schedule with the delivery: fixings, net tension, slide joints and surface depth are the four items that decide whether a zone stays safe after two seasons.

How it fits with the rest of the park

Most projects combine a play zone with a park train or a carousel, so the park has something for every age without becoming a ride park. Notre conception du parc team can lay the zone out with the rides, the walkways and the food units in one plan.

If you are starting from an empty site, le new park solution page sets out how the phases usually run.

Questions buyers ask about unpowered play zones

01

Do you supply the safety surface?

The surface is specified with the layout and can be included in the package or left to a local contractor working to our drawing.

02

Can the zone be installed indoors?

Oui, with the clear height the tallest structure needs. Send the hall drawing and we will check it.

03

How long does a project take?

Production depends on the structures chosen. Send the layout and we will confirm the schedule with the quotation.

04

Do we need staff to run it?

No operator is required for the equipment itself. Most parks keep one attendant at the entrance for supervision and ticketing.

05

Is it suitable for a resort rather than a park?

It is one of the most common resort additions, because it needs no power and no ride roster.

06

Can we add structures later?

Oui. A zone is designed with spare space, so a second tower or a jump pillow can be added without moving the first phase.

Portée: layout design, structures, safety surface specification and installation guidance. The package is quoted against your plot and the structures you choose.

Part of the outdoor unpowered park range built by DINIS.

QUE FAIRE INCLURE
  • Pays
  • Taille ou plan du site
  • Intérieur ou extérieur
  • Les manèges que vous avez en tête
  • Date d'ouverture

Je préfère parler? WhatsApp nous, ou par email [email protected]

Formulaire de contact 1

Obtenez un devis gratuit

FABRICATION

Où ce manège est construit.

Découpe de précision, soudage certifié, sablage, peinture cuite multicouche, PRF interne, équipement d'inspection dédié, et un test complet avant le chargement du conteneur.

01Fabrication de précision

Découpe laser de plaques et tubes, avec des procédés de soudage professionnels.

02Protection des surfaces

Sablage et processus de peinture cuite multicouche, c'est ce qui maintient la finition lors d'une balade en plein air.

03FRP interne

Les composants en fibre de verre sont moulés en interne à partir de résine, pour que les pièces thématiques correspondent au design fini.

04Inspection et tests

Ultrasonique, instructions d'inspection des particules magnétiques et de pénétration ainsi qu'un champ de test dédié avant livraison.

PRODUITS CONNEXES

Plus de produits dans cette direction.