Fahrgeschäfte · PARK-LÖSUNGEN · GLOBALE LIEFERUNG
Große Fahrten

50m Riesenrad

A 50 m herkömmlicher Fachwerkradtransport 128 Reiter rein 32 Schoten. Der Aufstieg vom 42 m-Modell für gut sichtbare Standorte.

PreisreferenzFrom US$345,000
1. Rated passenger capacity4 × 32 = 128 Menschen
2. Rated linear velocity0.204 MS
3. Rated power25 kW
4. Antriebsleistung18 kW
Diskussion zur AnpassungFertigungsunterstützungLieferung / Installationsanleitung
WICHTIGSTE HIGHLIGHTS

Warum Käufer dieses Modell in Betracht ziehen

  • 32 enclosed pods carry 128 passengers in one ride
  • A 35 X 32 m footprint keeps a 50 m landmark inside city land limits
  • One full turn takes about 11 Zu 12 Minuten, so it sells as a scenic ride
  • 25 kW rated power runs on a standard park supply
  • Versand erfolgt 8 x 40HQ-Container, assembled on site
TECHNISCHE DATEN

Verifizierte Spezifikationen

1. Rated passenger capacity4 × 32 = 128 Menschen
2. Rated linear velocity0.204 MS
3. Rated power25 kW
4. Antriebsleistung18 kW
5. Rated voltage380V, 50Hz
6. Schwenkdurchmesser45.14 M
7. Gerätehöhe49.8 M (ohne Blitzableiter)
8. Fußabdruck35 × 32 M
ANWENDUNGEN

Wo es passt

StadtparksWaterfront promenadesShopping centres and plazasResorts and holiday villagesDestination attractions
WIE MAN ES SPEZIFIZIERT

Specify the 50m Ferris Wheel like a buyer, kein Katalog

Drei kurze Anmerkungen. Öffnen Sie das, was Sie brauchen – kein Verkaufsgespräch.

So lesen Sie die Zahlen, bevor Sie nach einem Preis fragen
01Fußabdruck & Abmessungen

Dieses Modell: 35 × 32 M. Vergleichen Sie das mit Ihrer Website, plus Sicherheitsumschlag, die Warteschlange und der Wartungszugang.

02Kapazität & Durchsatz

Dieses Modell: 4 × 32 = 128 Menschen. Passen Sie den stündlichen Durchsatz an Ihr Spitzenfenster an, nicht Ihr Tagesdurchschnitt.

03Leistung & Dienstprogramme

Dieses Modell: 25 kW. Ihr Transformator, Verkabelung und Kontrollraum müssen dazu passen. Alles, was fehlt, wird zu zusätzlichen Bau- oder Elektroarbeiten.

04Gewicht & Installation

Gesamtgewicht und Grundbedarf entscheiden über das Fundament, den Hebeplan und den Montageplan.

Welche Stufe passt zu Ihrem Projekt?
START STANDARD

Das Standardmodell

Es deckt bereits den Fußabdruck ab, Kapazität und Aussehen, die die meisten Parks, Einkaufszentren und Messen können betrieben werden.

BEWEGEN SIE SICH NACH OBEN

Höhere Kapazität oder Skalierung

Wählen Sie ein größeres Modell, wenn Ihr Spitzenfenster erreicht ist, Ihre Orientierungsposition oder Ihr Ticketpreis benötigen mehr Durchsatz.

Gehen Sie individuell

Thematisch oder individuell gestaltet

Beim Thema, Kapazität oder Standortbedingungen außerhalb des Standardbereichs liegen, Das Erscheinungsbild und die Konfiguration werden für Ihr Projekt entwickelt.

Was ist enthalten, und was separat zitiert wird
Üblicherweise im Lieferumfang enthalten
  • Die Ausrüstung und ihre Standardkonfiguration
  • Elektrische und mechanische Komponenten im Werk montiert
  • Werkstestlauf vor dem Versand
  • Packliste, Betriebs- und Wartungsdokumentation
  • Im Angebot angegebene Ersatzteile
Üblicherweise separat bestätigt
  • Internationale Fracht, Versicherung und Zoll
  • Standortfundament, Arbeiten an Beton- und Stahlfundamenten
  • Stromversorgung des Fahrgeschäfts und örtliche Elektroarbeiten
  • Montageüberwachung, Reise und Unterkunft
  • Lokale Inspektion, Zertifizierung und Betriebslizenzen

Bestätigen Sie die genaue Aufteilung pro Modell mit dem Vertriebsteam – der endgültige Umfang ist im Angebot angegeben.

Richtpreis ab Werk, ohne Steuern und Fracht. Eine Installationsanleitung ist im Lieferumfang enthalten. Die Produktion ist ca 35 Tage; Die Garantie beträgt ein Jahr kostenlos plus lebenslange Wartung.

PRODUKTDETAILS

Buying notes for the 50m Ferris Wheel

If you want a landmark your whole city can see, and your site can take the height, A 50 m observation wheel is one of the safest investments in the amusement business. DINIS builds this wheel in a conventional truss design with 32 enclosed pods, so it carries 128 passengers in a single turn.

It is also the model most cities can actually approve. That is the whole point of it.

50m ferris wheel ride in operation with 32 passenger pods
multicolour radial lighting on a giant ferris wheel at night
ferris wheel rim and support structure illumination for night operation

Is a 50m ferris wheel the right ride for your site?

Look closely at this wheel if you run a city park, a waterfront development, a resort or a shopping centre with a large outdoor plaza. It works as a paid ride on its own, and it works after dark, which is when many venues struggle to keep visitors on site.

It is probably the wrong choice if your plot is under about 1,200 m2, if your local height limit sits below 50 M, or if your visitors arrive in one short holiday peak. In diesen Fällen die 42 m wheel is the better first step.

What to check before you buy an observation wheel

Land and height approval

The wheel itself needs 35 X 32 M. Add space for the queue, the boarding platform and the access ring. Height approval is the first question to settle, so ask your local authority before you start comparing models.

Power and foundation

Rated power is 25 kW and the drive unit draws 18 kW. A normal park supply covers it, so you do not need a dedicated substation for the wheel alone. The machine sits on a levelled concrete foundation, and we issue the base loads and the bolt layout with the drawings.

Delivery and lifting

One wheel ships in 8 x 40HQ containers and weighs around 110 T. Plan container access to the site and a mobile crane for the main lifts. The lifting sequence travels with the delivery documents.

How many visitors can a 50m observation wheel serve?

Each turn carries 128 passengers in 32 Schoten. At a rim speed of 0.204 m/s one full revolution takes roughly 11 Zu 12 Minuten, so with disciplined boarding you can expect around 500 Zu 650 Fahrer pro Stunde.

That long cycle works in your favour. Visitors stay on the wheel, take photos from the top, and come back with friends. Sell it as a separate ticket and it earns on its own.

42m or 50m: which ferris wheel fits your park?

What matters to you 42m wheel 50m wheel
Seats per ride 96 (24 Schoten) 128 (32 Schoten)
Land you need 20 X 20 M 35 X 32 M
One ride lasts Um 7.9 Minuten Um 11 Zu 12 Minuten
Versand 6 x 40HQ 8 x 40HQ
Best for City squares and tighter plots Waterfronts, malls and landmark positions

Opening timeline and what DINIS takes care of

Production takes about 35 Tage. Shipping and installation then depend on distance and on how ready your site is. DINIS supplies the packing list, the electrical and mechanical documentation, installation guidance and a one-year warranty with lifetime maintenance support.

Send us your plot size and your height limit, and we will confirm which wheel fits before you spend anything on foundations.

Questions buyers ask about the 50m ferris wheel

How much land does a 50m ferris wheel need?

Plan for 35 X 32 m for the structure itself, plus queue and access space around it.

Do the pods need air conditioning?

It is optional and priced separately. In hot climates most buyers add it, and it is the option people regret leaving out.

Can the wheel run every night?

Ja. Lighting is part of the package, and double-sided lighting is available if you want the wheel to read well from both directions.

Technische Referenz für Ihren Ingenieur: Höhe 49.8 M (ohne Blitzableiter) / 32 Schoten von 4 / 128 Passagiere / 0.204 MS / 25 kW rated and 18 kW-Antrieb / 380 V 50 Hz / 35 X 32 M / 8 x 40HQ / approx. 110 T.

WAS SOLLTE EINGESCHLOSSEN WERDEN
  • Land
  • Größe oder Plan der Website
  • Drinnen oder draußen
  • Fahrten, die Sie im Sinn haben
  • Eröffnungsdatum

Lieber reden? WhatsApp uns, oder E-Mail [email protected]

Kontaktformular 1

Holen Sie sich ein kostenloses Angebot

HERSTELLUNG

Wo dieses Fahrgeschäft gebaut wird.

Präzises Schneiden, Zertifiziertes Schweißen, Sandstrahlen, mehrschichtige Einbrennlackierung, hauseigenes FRP, spezielle Inspektionsausrüstung, und ein vollständiger Testlauf, bevor der Container beladen wird.

01Präzisionsfertigung

Laserschneiden von Platten und Rohren, mit professionellen Schweißverfahren.

02Oberflächenschutz

Sandstrahlen plus mehrschichtiges Einbrennlackierungsverfahren, Das ist es, was das Finish bei einer Fahrt im Freien gewährleistet.

03Eigenes FRP

Glasfaserkomponenten werden im eigenen Haus aus Harz geformt, So passen thematische Teile zum fertigen Design.

04Inspektion und Prüfung

Ultraschall, Anweisungen zur Magnetpulver- und Penetrationsprüfung sowie ein spezielles Testfeld vor der Auslieferung.

VERWANDTE PRODUKTE

Weitere Produkte in dieser Richtung.