Fahrgeschäfte · PARK-LÖSUNGEN · GLOBALE LIEFERUNG
Große Fahrten

25-Sitz Riesenpendel

Ein von oben angetriebenes Riesenpendel schwingt nach 100 Abschlüsse mit a 20.6 m Rotationsdurchmesser. Ein Nervenkitzelanker mit hohem Durchsatz für große Parks.

PreisreferenzFrom US$125,000
Höhe11.6 M
Rotation Diameter20.6 M
Capacity per Cabin1 Person
Single-Side Swing Angle≤ 100°
Diskussion zur AnpassungFertigungsunterstützungLieferung / Installationsanleitung
WICHTIGSTE HIGHLIGHTS

Warum Käufer dieses Modell in Betracht ziehen

  • 25 riders per cycle with a swing angle up to 100 Grad
  • A 14.9 m operating height on an 11.6 m Struktur
  • High hourly throughput for peak-season queues
  • 80 kW installierte Leistung, top-driven
  • Safety envelope of 28 X 18.5 X 18 M
TECHNISCHE DATEN

Verifizierte Spezifikationen

Höhe11.6 M
Rotation Diameter20.6 M
Capacity per Cabin1 Person
Single-Side Swing Angle≤ 100°
Swing Power30 kW × 2
Rotation Power7.5 kW
Betriebsgeschwindigkeit16.9 MS
Betriebshöhe14.9 M
Turntable Diameter5.48 M
Rotation Speed≤ 7.5 Drehzahl
Passenger Capacity25 Personen
Installierte Leistung80 kW
Designed Service Life12 Jahre
Footprint Dimensions20 m × 18.5 M
Safety Envelope28 m × 18.5 m × 18 M
ANWENDUNGEN

Wo es passt

ThemenparksLarge amusement parksMessegeländeResortsDestination attractions
WIE MAN ES SPEZIFIZIERT

Specify the 25-Seat Giant Pendulum like a buyer, kein Katalog

Drei kurze Anmerkungen. Öffnen Sie das, was Sie brauchen – kein Verkaufsgespräch.

So lesen Sie die Zahlen, bevor Sie nach einem Preis fragen
01Fußabdruck & Abmessungen

Dieses Modell: 20 m × 18.5 M. Vergleichen Sie das mit Ihrer Website, plus Sicherheitsumschlag, die Warteschlange und der Wartungszugang.

02Kapazität & Durchsatz

Dieses Modell: 1 Person. Passen Sie den stündlichen Durchsatz an Ihr Spitzenfenster an, nicht Ihr Tagesdurchschnitt.

03Leistung & Dienstprogramme

Dieses Modell: 30 kW × 2. Ihr Transformator, Verkabelung und Kontrollraum müssen dazu passen. Alles, was fehlt, wird zu zusätzlichen Bau- oder Elektroarbeiten.

04Gewicht & Installation

Gesamtgewicht und Grundbedarf entscheiden über das Fundament, den Hebeplan und den Montageplan.

Welche Stufe passt zu Ihrem Projekt?
START STANDARD

Das Standardmodell

Es deckt bereits den Fußabdruck ab, Kapazität und Aussehen, die die meisten Parks, Einkaufszentren und Messen können betrieben werden.

BEWEGEN SIE SICH NACH OBEN

Höhere Kapazität oder Skalierung

Wählen Sie ein größeres Modell, wenn Ihr Spitzenfenster erreicht ist, Ihre Orientierungsposition oder Ihr Ticketpreis benötigen mehr Durchsatz.

Gehen Sie individuell

Thematisch oder individuell gestaltet

Beim Thema, Kapazität oder Standortbedingungen außerhalb des Standardbereichs liegen, Das Erscheinungsbild und die Konfiguration werden für Ihr Projekt entwickelt.

Was ist enthalten, und was separat zitiert wird
Üblicherweise im Lieferumfang enthalten
  • Die Ausrüstung und ihre Standardkonfiguration
  • Elektrische und mechanische Komponenten im Werk montiert
  • Werkstestlauf vor dem Versand
  • Packliste, Betriebs- und Wartungsdokumentation
  • Im Angebot angegebene Ersatzteile
Üblicherweise separat bestätigt
  • Internationale Fracht, Versicherung und Zoll
  • Standortfundament, Arbeiten an Beton- und Stahlfundamenten
  • Stromversorgung des Fahrgeschäfts und örtliche Elektroarbeiten
  • Montageüberwachung, Reise und Unterkunft
  • Lokale Inspektion, Zertifizierung und Betriebslizenzen

Bestätigen Sie die genaue Aufteilung pro Modell mit dem Vertriebsteam – der endgültige Umfang ist im Angebot angegeben.

Richtpreis ab Werk, ohne Steuern und Fracht. Eine Installationsanleitung ist im Lieferumfang enthalten. Die Produktion ist ca 35 Tage; Die Garantie beträgt ein Jahr kostenlos plus lebenslange Wartung.

PRODUKTDETAILS

Buying notes for the 25-Seat Giant Pendulum

A 25-seat giant pendulum tells visitors what kind of park they are standing in. It swings to 100 Grad, lifts them to 14.9 m and turns them while they swing, all from an 11.6 m Struktur.

That makes it a thrill anchor, and a thrill anchor is judged on two things: whether your park has the audience for it, and whether your plot can carry the space around it.

25Fahrer pro Zyklus
100°single-side swing angle
14.9 MBetriebshöhe
80 kWinstalled power
giant pendulum ride tested at the dinis factory
giant pendulum ride structure inspected before delivery
giant pendulum ride installed in an outdoor amusement park

Why a giant pendulum earns its place in the line-up

Families buy the carousel and the train. Teenagers and young adults buy the pendulum. A park with only family rides loses that group at the gate, and they are the visitors who stay longest and spend most on a weekend.

One anchor thrill ride is usually enough to change how the park is described: not a children’s park with a few rides, but a park with something for everyone.

The safety envelope is bigger than the ride

The footprint is 20 X 18.5 M, but the safety envelope is 28 X 18.5 m with 18 m lichte Höhe. The extra ring belongs to the swing rather than to the machine, and it is the part of the plan that catches buyers out.

Fence line, queue and landscaping all sit outside that envelope. Put a walkway behind it so the swing always happens in front of an audience.

Planning note: If your plot is tight, check the 28 X 18.5 m envelope against the drawing before you check the price. Moving the fence after installation costs more than choosing a different ride.

Twenty-five riders per cycle: what a peak hour looks like

A swing cycle including loading runs about three minutes, so plan for roughly 350 Zu 400 riders an hour when the queue is steady.

That throughput is why the pendulum holds a queue. Visitors can see the whole cycle from the walkway, and the ride reads as worth the wait.

Power and the drive system

Installierte Leistung ist 80 kW: two 30 kW swing motors and a 7.5 kW rotation motor. The ride is top-driven, which keeps the mechanism above the platform and out of the visitor area.

The turntable diameter is 5.48 m and the rotation speed is capped at 7.5 Drehzahl, so the spinning part of the cycle stays comfortable while the swing does the work.

Twelve years of design life: planning the service side

The designed service life is 12 Jahre. Before you order, ask for the recommended spare-parts list and the inspection intervals, then match them to the maintenance team you already have.

One year of warranty is included, plus lifetime maintenance support. Most buyers keep a short list of swing and rotation parts on site so a busy weekend is never interrupted.

ROOM FOR IT

What the pendulum delivers

25 Fahrer pro Zyklus, 100 degrees of swing and a 14.9 m Arbeitshöhe. In a park with a thrill audience this is the ride that sets the ticket tier.

Questions buyers ask about the 25-seat pendulum

01

How many riders per hour can we plan for?

Roughly 350 Zu 400 with a three minute cycle. Send us your peak-day attendance and we will check the queue length against your walkway width.

02

How much space does the ride really need?

A 20 X 18.5 m footprint inside a 28 X 18.5 m safety envelope with 18 m lichte Höhe. The envelope is the figure to take to your layout drawing.

03

What power supply is required?

80 kW installiert, made up of two 30 kW swing motors and a 7.5 kW rotation motor. Tell us your voltage and frequency and we will match the control cabinet.

04

Is it suitable for families?

It is a thrill ride with height and weight limits set by your local operating licence. Pair it with family attractions and the park serves both audiences in one visit.

05

Wie lange dauert die Lieferung??

Um 35 days in production, then shipping and on-site assembly. Confirm the container count and the crane date with the quotation so your schedule stays realistic.

06

What does the after-sales package cover?

One year free of charge plus lifetime maintenance support, with a recommended spare-parts list you can keep on site.

Technische Referenz: structure height 11.6 M / Betriebshöhe 14.9 M / 25 Reiter / swing angle within 100 Grad / operating speed 16.9 MS / rotation diameter 20.6 M / turntable diameter 5.48 M / rotation speed within 7.5 Drehzahl / installed power 80 kW (2 X 30 kW swing + 7.5 kW Rotation) / Fußabdruck 20 X 18.5 M / safety envelope 28 X 18.5 X 18 M / Design Leben 12 Jahre.

For more thrill equipment, siehe die thrill rides collection built by DINIS.

WAS SOLLTE EINGESCHLOSSEN WERDEN
  • Land
  • Größe oder Plan der Website
  • Drinnen oder draußen
  • Fahrten, die Sie im Sinn haben
  • Eröffnungsdatum

Lieber reden? WhatsApp uns, oder E-Mail [email protected]

Kontaktformular 1

Holen Sie sich ein kostenloses Angebot

HERSTELLUNG

Wo dieses Fahrgeschäft gebaut wird.

Präzises Schneiden, Zertifiziertes Schweißen, Sandstrahlen, mehrschichtige Einbrennlackierung, hauseigenes FRP, spezielle Inspektionsausrüstung, und ein vollständiger Testlauf, bevor der Container beladen wird.

01Präzisionsfertigung

Laserschneiden von Platten und Rohren, mit professionellen Schweißverfahren.

02Oberflächenschutz

Sandstrahlen plus mehrschichtiges Einbrennlackierungsverfahren, Das ist es, was das Finish bei einer Fahrt im Freien gewährleistet.

03Eigenes FRP

Glasfaserkomponenten werden im eigenen Haus aus Harz geformt, So passen thematische Teile zum fertigen Design.

04Inspektion und Prüfung

Ultraschall, Anweisungen zur Magnetpulver- und Penetrationsprüfung sowie ein spezielles Testfeld vor der Auslieferung.

VERWANDTE PRODUKTE

Weitere Produkte in dieser Richtung.