Fahrgeschäfte · PARK-LÖSUNGEN · GLOBALE LIEFERUNG
Karussells & Karussells

Portable Carousel for Sale

A 16-seat carousel built to travel: 7.7 m in operation, folding to 2.65 m x 3.9 m on its own wheels for the trailer, on a single-phase 220 V supply.

Modell16-seat folding carousel
Kapazität16 Reiter
Rotationsgeschwindigkeit4 rounds per minute
Footprint in operation7.7 M
Diskussion zur AnpassungFertigungsunterstützungLieferung / Installationsanleitung
WICHTIGSTE HIGHLIGHTS

Warum Käufer dieses Modell in Betracht ziehen

  • Folds to 2.65 m x 3.9 m for road transport
  • Wheels stay on the frame, so one trailer moves it
  • Runs on 220 V single phase, 7 kW insgesamt
  • 16 riders at 4 rounds per minute
TECHNISCHE DATEN

Verifizierte Spezifikationen

Modell16-seat folding carousel
Kapazität16 Reiter
Rotationsgeschwindigkeit4 rounds per minute
Footprint in operation7.7 M
Gerätehöhe4.2 M
Folded size2.65 m wide x 3.9 m hoch
Antriebsleistung4 kW
Lighting3 kW
Gesamtleistung7 kW
Operating voltage220 V single phase
ANWENDUNGEN

Wo es passt

Traveling fairs and carnivalsMall and atrium eventsHoliday and seasonal fairsFamily parks without a 380 V supply
WIE MAN ES SPEZIFIZIERT

Specify the Portable Carousel for Sale like a buyer, kein Katalog

Drei kurze Anmerkungen. Öffnen Sie das, was Sie brauchen – kein Verkaufsgespräch.

So lesen Sie die Zahlen, bevor Sie nach einem Preis fragen
01Fußabdruck & Abmessungen

Dieses Modell: 7.7 M. Vergleichen Sie das mit Ihrer Website, plus Sicherheitsumschlag, die Warteschlange und der Wartungszugang.

02Kapazität & Durchsatz

Dieses Modell: 16 Reiter. Passen Sie den stündlichen Durchsatz an Ihr Spitzenfenster an, nicht Ihr Tagesdurchschnitt.

03Leistung & Dienstprogramme

Dieses Modell: 4 kW. Ihr Transformator, Verkabelung und Kontrollraum müssen dazu passen. Alles, was fehlt, wird zu zusätzlichen Bau- oder Elektroarbeiten.

04Gewicht & Installation

Gesamtgewicht und Grundbedarf entscheiden über das Fundament, den Hebeplan und den Montageplan.

Welche Stufe passt zu Ihrem Projekt?
START STANDARD

Das Standardmodell

Es deckt bereits den Fußabdruck ab, Kapazität und Aussehen, die die meisten Parks, Einkaufszentren und Messen können betrieben werden.

BEWEGEN SIE SICH NACH OBEN

Höhere Kapazität oder Skalierung

Wählen Sie ein größeres Modell, wenn Ihr Spitzenfenster erreicht ist, Ihre Orientierungsposition oder Ihr Ticketpreis benötigen mehr Durchsatz.

Gehen Sie individuell

Thematisch oder individuell gestaltet

Beim Thema, Kapazität oder Standortbedingungen außerhalb des Standardbereichs liegen, Das Erscheinungsbild und die Konfiguration werden für Ihr Projekt entwickelt.

Was ist enthalten, und was separat zitiert wird
Üblicherweise im Lieferumfang enthalten
  • Die Ausrüstung und ihre Standardkonfiguration
  • Elektrische und mechanische Komponenten im Werk montiert
  • Werkstestlauf vor dem Versand
  • Packliste, Betriebs- und Wartungsdokumentation
  • Im Angebot angegebene Ersatzteile
Üblicherweise separat bestätigt
  • Internationale Fracht, Versicherung und Zoll
  • Standortfundament, Arbeiten an Beton- und Stahlfundamenten
  • Stromversorgung des Fahrgeschäfts und örtliche Elektroarbeiten
  • Montageüberwachung, Reise und Unterkunft
  • Lokale Inspektion, Zertifizierung und Betriebslizenzen

Bestätigen Sie die genaue Aufteilung pro Modell mit dem Vertriebsteam – der endgültige Umfang ist im Angebot angegeben.

PRODUKTDETAILS

Buying notes for the Portable Carousel for Sale

A carousel that has to earn at more than one site has to move. That is the whole point of this model: the platform folds, the wheels stay on the frame, and one trailer takes it from a fair to a mall event to the next booking.

In operation it is a full 16-seat carousel — same figures, same lighting, same 4 rounds per minute. What changes is the frame: it is built to come apart and go back together on a flat floor, without a workshop or a crane. That is what separates it from the fixed carousel range, which is built to stay on one site.

16riders at 4 rounds per minute
2.65 X 3.9 Mfolded size for road transport
220 Vsingle phase, 7 kW total power
4.2 Mequipment height in operation
16 seat folding carousel ride for traveling fairs
Portable carousel folded and ready for delivery to the buyer

What makes this one portable

Two kinds of folding carousel are built in the trade. The first folds flat and then still has to be lifted onto a truck. The second keeps its wheels, so the folded ride rolls onto the trailer and off again at the next pitch. This model is the second kind.

The canopy, the figures and the platform fold with the frame. Nothing is dismantled down to loose parts that have to be reassembled from a drawing on site, and the folded machine travels on a standard trailer rather than a low-loader.

Foldable carousel horse ride prepared for road transport
Folding pattern of a portable carousel platform by DINIS

See it fold and move

Fifty seconds at a fair: the ride running, then the platform folding down onto its wheels ready for the road. Nothing is dismantled to loose parts.

The folding carousel running at a fair and folding for transport.

Fold it, move it, run it

Three sets of numbers decide whether a traveling carousel works for you: what it measures while it runs, what it measures on the road, and what power it needs when it arrives.

Footprint in operation7.7 M
Gerätehöhe4.2 M
Folded size2.65 m wide x 3.9 m hoch
Leistung4 kW-Antrieb + 3 kW lighting, 7 kW insgesamt
Stromspannung220 V single phase
Kapazität16 riders at 4 rounds per minute

The single-phase supply is the part operators notice first. The ride does not need a 380 V connection, so a mall hall, a hotel forecourt, a resort courtyard or a fairground pitch with domestic power can still run it.

Where it earns

TRAVELING FAIRS

A different town every week

The folding frame and the wheels are built for operators who move between fairs. One trailer carries the ride, and the lighting package keeps it working after dark. Where the pitch is fixed instead, Die Fairground Carousel is the usual choice.

MALL AND ATRIUM EVENTS

Short lets, quick build

Malls book rides for a season, not a decade. A machine that folds travels into the atrium and comes out again when the campaign ends. If the atrium becomes a permanent home, Die Indoor-Karussell is the model that stays.

HOLIDAY FAIRS

Weihnachten, Eid and Tet pitches

Theme the figures and the canopy for the season, run the pitch, then move the same ride to the next holiday site. Operators who keep one seasonal pitch often buy the carnival carousel stattdessen.

FAMILY PARKS

Where 380 V is not available

Parks and resorts on a single-phase supply can operate this model without a transformer or a new electrical connection. Where the ride stays put, buyers usually start from the family carousel range.

Figuren, lighting and finish

The folding frame takes the same figure sets as our fixed carousels: Pferde, carriages and themed figures, moulded in fibreglass (Frp) and painted in the DINIS factory in Henan. The three-kilowatt lighting package is part of the build rather than an accessory added later, which matters when the ride has to look right on a pitch at night.

Tell us the theme and the colours you want, and we will put the figure options against the pitch or the hall the ride is going into. If you are still comparing platforms and drives, start from how to choose a carousel.

Carnival portable carousel with folding platform and wheels

Planning the pitch

A folding carousel only saves you time if the site is ready when it arrives. Four things to settle before the first event:

  • Level hardstanding for a 7.7 m Grundfläche, with room to unfold the platform on one side
  • A 220 V supply within reach of the control panel — 7 kW insgesamt, so check the circuit the site can give you
  • A trailer rated for the folded machine at 2.65 m wide and 3.9 m hoch
  • A crew briefed for assembly and dismantling, with our video and manual to hand

Questions buyers ask

01

How does it travel?

Folded, the ride measures 2.65 m wide and 3.9 m high with its wheels on the frame, so a standard trailer carries it without a low-loader.

02

What power does it need?

220 V single phase. The drive draws 4 kW and the lighting 3 kW, Also 7 kW insgesamt.

03

How much space does it take in use?

The operating footprint is 7.7 m and the equipment stands 4.2 m hoch. Plan the queue, the fence and the boarding around that footprint.

04

Wie viele Fahrer pro Zyklus?

16 riders at 4 rounds per minute, which keeps a queue moving through a busy evening.

05

Can the figures and colours be changed?

Ja. Figuren, canopy colours and lighting are chosen with the order, and the figures are produced in our own plant.

06

When is a fixed carousel the better buy?

When the ride stays on one site all season. A fixed platform costs less for the same seat count, and the larger sizes only exist as fixed builds: see the 36 seat and above platforms und die double decker models.

07

What about spare parts on the road?

Ask for the recommended spares list with the quotation. Most electrical parts overlap with common motors and generators, so a local workshop can usually help between events.

Next step

Send us the venues you have in mind and how often you expect to move the ride. We will check the folded size against your trailer and the power against the sites, then come back with the configuration, the drawing and the production date.

WAS SOLLTE EINGESCHLOSSEN WERDEN
  • Land
  • Größe oder Plan der Website
  • Drinnen oder draußen
  • Fahrten, die Sie im Sinn haben
  • Eröffnungsdatum

Lieber reden? WhatsApp uns, oder E-Mail [email protected]

Kontaktformular 1

Holen Sie sich ein kostenloses Angebot

HERSTELLUNG

Wo dieses Fahrgeschäft gebaut wird.

Präzises Schneiden, Zertifiziertes Schweißen, Sandstrahlen, mehrschichtige Einbrennlackierung, hauseigenes FRP, spezielle Inspektionsausrüstung, und ein vollständiger Testlauf, bevor der Container beladen wird.

01Präzisionsfertigung

Laserschneiden von Platten und Rohren, mit professionellen Schweißverfahren.

02Oberflächenschutz

Sandstrahlen plus mehrschichtiges Einbrennlackierungsverfahren, Das ist es, was das Finish bei einer Fahrt im Freien gewährleistet.

03Eigenes FRP

Glasfaserkomponenten werden im eigenen Haus aus Harz geformt, So passen thematische Teile zum fertigen Design.

04Inspektion und Prüfung

Ultraschall, Anweisungen zur Magnetpulver- und Penetrationsprüfung sowie ein spezielles Testfeld vor der Auslieferung.

VERWANDTE PRODUKTE

Weitere Produkte in dieser Richtung.