MANÈGES · SOLUTIONS PARCS · LIVRAISON MONDIALE
Tower Rides

Samba Tower

A samba tower is the ride that lets a family board together. Each cabin takes two adults and two children, so parents ride with their children instead of waiting at the fence. Eight cabins carry 32 coureurs à un 6.5 m operating…

Référence de prixFrom US$74,000
Hauteur de l'équipement12 m
Hauteur de fonctionnement6.5 m
Slewing diameterÀ propos 8.3 m
Number of cabins8
Discussion sur la personnalisationAccompagnement à la fabricationLivraison / conseils d'installation
POINTS FORTS

Pourquoi les acheteurs considèrent ce modèle

  • 32 riders per cycle in 8 family cabins
  • Two adults and two children share one cabin
  • 6.5 m operating height with a 12 structure
  • 20 kW installed power on a standard park supply
  • Ships in one 40HQ container at about 4,600 kg
DONNÉES TECHNIQUES

Spécifications vérifiées

Hauteur de l'équipement12 m
Hauteur de fonctionnement6.5 m
Slewing diameterÀ propos 8.3 m
Number of cabins8
Capacity per cabin2 adults + 2 children, ou 4 children
Total capacity32 personnes
Live load per cabinJusqu'à 220 kg
Rotation power3 kW
Hydraulic pump15 kW
Éclairage2 kW
Total power20 kW
Operating time2-3 minutes, réglable
InstallationFixed
Operating temperature0-40 C
Expédition1 x 40 QG, à propos 4,600 kg
DEMANDES

Où il peut s'adapter

Parcs familiauxCity parksResortsShopping centresFairgrounds
COMMENT LE SPÉCIFIER

Specify the Samba Tower like a buyer, pas un catalogue

Trois courtes notes. Ouvrez celui dont vous avez besoin – pas de discours commercial.

Comment lire les chiffres avant de demander un prix
01Empreinte & dimensions

Vérifiez la zone requise par rapport à votre site, plus l'enveloppe de sécurité, espace de file d'attente et accès à la maintenance.

02Capacité & débit

Ce modèle: 8. Adaptez le débit horaire à votre fenêtre de pointe, pas votre moyenne quotidienne.

03Pouvoir & utilitaires

Ce modèle: 3 kW. Votre transformateur, le câblage et la salle de contrôle doivent correspondre. Tout ce qui manque devient un travail civil ou électrique supplémentaire.

04Poids & installation

Le poids total et les exigences de base déterminent la fondation, le plan de levage et le planning d'installation.

Quel niveau correspond à votre projet
DÉMARRER LA NORME

Le modèle standard

Il couvre déjà l'empreinte, capacité et apparence que la plupart des parcs, les centres commerciaux et les foires peuvent fonctionner.

MONTER

Capacité ou échelle plus élevée

Choisissez un modèle plus grand lorsque votre fenêtre de pointe, votre position historique ou le prix de votre billet a besoin de plus de débit.

ALLER SUR MESURE

Construction thématique ou personnalisée

Quand le thème, la capacité ou les conditions du site se situent en dehors de la plage standard, l'apparence et la configuration sont conçues pour votre projet.

Ce qui est inclus, et ce qui est cité séparément
TYPIQUEMENT INCLUS
  • L'équipement et sa configuration standard
  • Composants électriques et mécaniques installés en usine
  • Test en usine avant expédition
  • Liste de colisage, documentation d'exploitation et d'entretien
  • Pièces de rechange indiquées dans le devis
TYPIQUEMENT CONFIRMÉ SÉPARÉMENT
  • Fret international, assurance et douane
  • Fondation du site, travaux de base en béton et en acier
  • Alimentation électrique du manège et travaux électriques locaux
  • Supervision des installations, voyage et hébergement
  • Inspection locale, certification et licences d'exploitation

Confirmez la répartition exacte par modèle avec l'équipe commerciale - le périmètre final est indiqué dans le devis.

Prix ​​usine indicatif, hors taxes et hors fret. Des instructions d'installation sont incluses. La production concerne 35 jours; la garantie est d'un an gratuit plus une maintenance à vie.

DÉTAILS DU PRODUIT

Buying notes for the Samba Tower

A samba tower is the ride that lets a family board together. Each cabin takes two adults and two children, so parents ride with their children instead of waiting at the fence.

Eight cabins carry 32 coureurs à un 6.5 m operating height on 20 kW of installed power, and the whole ride ships in one 40HQ container.

32riders per cycle
8family cabins
6.5 moperating height
1 x 40 QGshipping volume
samba tower ride with balloon gondolas at a park
samba tower cabins lifting at a family park
samba tower ride built for family parks
samba tower gondolas and tower structure

A tower ride families can share

Most tower rides split the queue: children ride, adults watch. The samba tower is built the other way round. A cabin holds two adults and two children, or four children, with a live load of up to 220 kg.

That changes the ticket. A family buys four seats at once, the ride photographs well, and parents do not spend the cycle standing at the fence with a phone.

Eight cabins, thirty-two riders

A cycle runs two to three minutes and is adjustable, so you can shorten it on a busy afternoon and lengthen it when the park is quiet.

With eight cabins and a three minute cycle, plan for roughly 500 à 600 riders an hour at a steady load factor. That is a family ride throughput on a footprint of about 8.3 m.

Lift, rotate and oscillate

The ride does three things at once: the cabins lift, the platform rotates and each cabin swings. It is gentle enough for children and lively enough that teenagers ride it twice.

Because the motion is hydraulic rather than a free fall, the ride suits parks where the 35m tour tournante is too intense for the audience you have.

Space and power: 8.3 m et 20 kW

The structure stands 12 m and the slewing diameter is about 8.3 m. Plan the fence and the queue outside that circle, plus the access route for one container and a crane.

Installed power is 20 kW: 3 kW for rotation, 15 kW for the hydraulic pump and 2 kW for lighting. That is a standard park supply, and the lighting load is light enough to run the ride into the evening.

The stated operating range is 0 à 40 C. If your site sits outside it, tell us at the quotation stage.

Price and shipping

The indicative factory price starts at US$74,000, shipping in one 40HQ container at about 4,600 kg. Foundation work, freight and installation labour are quoted for your site.

If you are building a family zone, the samba tower sits well next to the carrousel pour enfants et le grand joyeux aller rond: three rides with different motions and one shared queue area.

Questions buyers ask about the samba tower

01

How many people ride at once?

Thirty-two, in eight cabins. Each cabin takes two adults and two children, or four children, jusqu'à 220 kg.

02

Is it suitable for young children?

It is designed for families. Your local rules set the height and age limits, and we supply the figures for the application.

03

What power supply does it need?

20 kW in total on a standard three-phase supply. Send us your voltage and frequency before the order.

04

How much space does it need?

A structure 12 m tall with a slewing diameter of about 8.3 m, plus the fence line and the queue.

05

Does it run in the rain?

It is a fixed outdoor ride and runs in normal weather. Check the wind limit in your local code for the operating rule.

06

What is the lead time?

À propos 35 days in production, then sea freight and site assembly. One container keeps the delivery simple.

Référence technique: structure height 12 m / operating height 6.5 m / slewing diameter about 8.3 m / 8 cabines / 2 adults + 2 children or 4 children per cabin / 32 cavaliers / live load per cabin up to 220 kg / rotation 3 kW, hydraulic pump 15 kW, éclairage 2 kW, total 20 kW / cycle 2-3 minutes, réglable / fixed installation / operating temperature 0-40 C / 1 x 40HQ at about 4,600 kg.

Part of the tours et manèges range built by DINIS.

QUE FAIRE INCLURE
  • Pays
  • Taille ou plan du site
  • Intérieur ou extérieur
  • Les manèges que vous avez en tête
  • Date d'ouverture

Je préfère parler? WhatsApp nous, ou par email [email protected]

Formulaire de contact 1

Obtenez un devis gratuit

FABRICATION

Où ce manège est construit.

Découpe de précision, soudage certifié, sablage, peinture cuite multicouche, PRF interne, équipement d'inspection dédié, et un test complet avant le chargement du conteneur.

01Fabrication de précision

Découpe laser de plaques et tubes, avec des procédés de soudage professionnels.

02Protection des surfaces

Sablage et processus de peinture cuite multicouche, c'est ce qui maintient la finition lors d'une balade en plein air.

03FRP interne

Les composants en fibre de verre sont moulés en interne à partir de résine, pour que les pièces thématiques correspondent au design fini.

04Inspection et tests

Ultrasonique, instructions d'inspection des particules magnétiques et de pénétration ainsi qu'un champ de test dédié avant livraison.

PRODUITS CONNEXES

Plus de produits dans cette direction.