36-Train ferroviaire pour personnes

A sightseeing train does two jobs at once. It carries visitors across a large site, and it sells a ticket while doing it.

The 36-person model is the version most parks start with: one locomotive, three carriages of twelve, and a route shaped around your own site. The train is a fixed cost. The track is not, and that is the number to plan first. For higher capacity on the same principle, le 54-train personne carries 18 per carriage on a wider gauge. Track laying and assembly are covered step by step in how to assemble the train ride.

The route sets the budget, not the train

Track is quoted by the metre, with 12 kg rail on concrete sleepers. On a 600 m loop that line item is as important as the train, and it is the part buyers estimate from memory.

Walk the site before you ask for a quotation. Mark the station, the stops and the depot on a plan, then measure the line. A route drawn on a map and a route that respects the ground are rarely the same length.

1. Walk the line at ground level

   Check drainage, tree roots and any service trench that crosses the route. Those three items move a track more often than anything else.

2. Mark every stop before you price it

   Two or three stops carry more riders per hour than a single station, and each one needs a platform and a waiting area.

3. Find the tightest curve

   The minimum turning radius is 10 m. If the tightest bend is below that, the route changes before the track does.

4. Plan the depot for the longest train

   The locomotive is 5.1 m and each carriage 4.35 m. Leave room for the train you may add later, not only the one you are buying.

5. Confirm the gradient

   The line handles up to 1.5%. A route with a steeper section needs a different alignment, and that is cheaper to fix on paper.

What one train does in a day

Twelve riders per carriage with forward-facing seats, thirty-six in total, at up to 5 km / h. The speed sounds modest until you convert it: un 700 m loop with two stops runs in about twelve minutes, which is roughly five trips an hour at a steady pace.

That is around 180 passengers an hour with one train, and it is why the route design matters as much as the seat count. A shorter loop with a clear station beats a long scenic line with a single stop.

Pouvoir: a battery train on a 72 V pack

Two 5.5 kW AC motors run from a 72 V 250 Ah lithium pack. There is no diesel exhaust along the route, which matters in zoos, botanical gardens and enclosed valleys.

Charging is planned around your operating day: charge overnight, top up at midday if the schedule is long. Tell us the route length and the number of trips and we will confirm the pack size against your day.

Theming the carriages

Price and what sits outside it

The train is quoted at US$42,400 to US$44,600 for the standard configuration. Piste, sleepers, foundation work and the station platforms are quoted against your own route, which is why two parks with the same train can have very different totals.

Send the route drawing with the stops marked. You get the train price, the track price per metre and a delivery schedule in one reply. If the route grows later, le 54-train personne et le large rail sightseeing train share the same approach at a bigger scale.

Questions buyers ask about the 36-person track train

Référence technique: 36 passagers, 12 par voiture / one locomotive and three carriages / locomotive 5.1 x 1.1 x 2.01 m / carriage 4.35 x 0.99 x 1.65 m / 5.5 kWx 2 AC motors, 72 V 250 Ah le lithium / 406 mm gauge on 12 Rail de kg avec traverses en béton / jusqu'à 5 km / h / turning radius 10 m minimum / gradient up to 1.5% / track quoted per metre.

DINIS builds rail sightseeing trains to order up to 200 passagers. Send the route length, the station positions and the visitors you expect per hour, and the reply covers train length, track plan and price band.